Created on: 2018-04-03
How to repair, install, fix, change or replace a door panel. Door panels need to be removed to access the inside components of the door, like the window regulator or exterior door handles on 16 Ram 1500 pickup truck.
Flat Blade Screwdriver
T20 Driver
Phillips Head Screwdriver
Trim Tool Set
Hi, I’m Mike from 1A Auto. We’ve been selling auto parts for over 30 years!
We'll open up the door. And we are going to start off by coming up here and removing this cover. You can just put your hands behind it, kind of pull up. And you can see there's a push pin here, and a push pin here, and then there's two little hooks that hook into the door panel itself. Around the perimeter of the door panel are six T-20 torx bolts, and they're actually made of plastic, which is a little strange. We'll go all around the door panel, and we'll start pulling these out. Being that they're plastic, they don't come out like a normal screw does. You have to be very gentle, and almost pull on them as they unscrew. Here we go.
Right here, behind the door panel, is a secret cover that you can pop off with a flat-tip screw driver. And you can see, you want to grab it from the top, and go down, and then behind that is a Phillips head screw. So now, we'll use a Phillips head screwdriver to remove the Phillips head screw. For the power window switch, we'll just slide a little screw driver in here. It pops out super easy. And we'll pop up this little safety pin. Here we go. And then you can push the tab down and pull the connector out.
These little anchors here, they need to come out of the door panel because we need to lift it up. We just lost one. Now we'll do the upper one, and there's the second one. So we'll go all the way around the door, and pop those out. Then all we have to do is lift straight up on the door panel, and it should come off.
To put the back panel back on, we're going to slide this lock, up through the hole, and then we're going to feed the power window of wires per window, switch wires, through this, and then kind of drop it down onto the door panel. Now we'll plug in the window switch and drop it right into the door panel.
We're now going to slide the door handle bezel, behind, doing the rear section first, and then snapping it into place. And then there's a large Phillips head screw that we'll slide right through here and screw in. And then there's the little access panel that will also slide in, doing the bottom first. And that also just snaps right in. We're now at the point where we can put these door panel screws back in. They go in just like this. Looks like I'm probably going to have to hold the bottom piece to get the screw in. And we'll do this, all the way around the door. Lastly, we'll put this right back on to cover up the mirror bolts.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
How to remove or replace the interior door panel trim on your vehicle. You need to remove the door panel for a number of different repairs, for example door handles, window regulators, power window motors, door locks and more to the Dodge Intrepid, years 93, 94, 95, 96, and 97.