How To Remove Front Door Panel 2004-13 Nissan Titan
Created on: 2014-04-11
Watch this video to learn how to remove and replace the front interior door panel on your 04-13 Nissan Titan.
-
step 1 :Removing the Door Panel
- Pry off the panel inside the door handle with a flat blade screwdriver
- Pry off the door pull panel with a flat blade screwdriver
- Remove the 10mm bolt from inside the door handle
- Remove the two 10mm bolts from the door pull
- Pry the window switch off with a flat blade screwdriver
- Disconnect the window switch wiring harness
- Pry off the door panel by hand
- Lift the door handle off the window sill
- Disconnect the courtesy light wiring harness
- Disconnect the door latch cable
- Disconnect the door lock cable
-
step 2 :Reinstalling the Door Panel
- Connect the door lock cable
- Connect the door latch cable
- Connect the courtesy light wiring harness
- Lift the door panel onto the windowsill, pulling the window switch wiring through the cavity
- Push the door panel clips in
- Reconnect the window switch wiring harnesses
- Push the switch panel in, starting at the back
- Insert the 10mm bolt inside the door handle
- Insert the two 10mm bolts into the door pull
- Push the door handle trim panel back on
- Push the door pull panel on
Tools needed
-
Flat Blade Screwdriver
Phillips Head Screwdriver
10mm Socket
Ratchet
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video we're going to show you how to remove and replace the door panel on this 2004 Nissan Titan. We'll show you on the driver's door but the passenger's door is a similar procedure. The only tools you'll need for this is a flat-blade screwdriver and a 10mm socket and ratchet.
Start off by prying off this little panel back here behind the door handle and then this panel along your pull handle. Then you want to remove this 10mm bolt, this 10mm bolt, and this 10mm bolt right here. You can use a Phillips screwdriver instead if you'd prefer. Using a flat blade screwdriver, pry up on the side of your switch pack. Then lift the front up and then slide the back forward, and then push the tab on each of these harnesses and pull them free. Now, pull out along the door panel to release the clips and lift it up and out of the window sill. Then push the tabs on either side of this harness and pull it free. Then push this forward, lift it up and out and do the same thing with this one.
To replace your door panel take your lock cable, push it back down into place, and then slide that back into the bracket, and do the same thing with your door handle cable. Then, reconnect your courtesy light. Then lift your door panel back up unto the window sill, making sure that your switch pack harnesses are going back up through the door panel. Once you have it in place make sure the clips line up and just hit them back in. Reconnect your switch pack. Then slide this tab on the back down in first and then push the front down. Then, replace those three 10mm Phillips' bolts. Push the small panel behind your door handle back into place and then the small panel in your pull handle in place and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Bumps Thuds and Vibrations How to Diagnose Bad Car Engine Mounts
Check out this video to learn how to diagnose a bad engine mount in your vehicle!
