How To Remove Front Door Panel 2004-12 Chevy Colorado
Created on: 2012-10-30
Watch this video to learn how to remove and replace the front interior door panel on your 04-12 Chevy Colorado.
-
step 1 :Removing the Door Panel
- Remove the two Phillips head screw inside the door pull
- Pry up the window switch panel
- Disconnect the door lock wiring harness
- Disconnect the window switch wiring harnesses
- Disconnect the mirror switch wiring harness
- Remove the Phillips head screw inside the door handle
- Remove the door handle bezel
- Pry off the mirror base trim piece
- Pry out the door panel
- Lift the door panel up and off
- Disconnect the speaker wiring lead
-
step 2 :Installing the Door Panel
- Remove any remaining clips from the door and insert them into the panel
- Connect the speaker wiring lead
- Lift the door panel into place
- Push in the door panel clips
- Push on the mirror base trim piece
- Push in the door handle bezel
- Insert the Phillips head screw inside the door handle
- Connect the door lock wiring harness
- Connect the window switch wiring harnesses
- Connect the mirror switch wiring harness
- Push in the panel
- Insert the two Phillips head screw inside the door pull
Tools needed
-
Phillips Head Screwdriver
Needle nose pliers
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to remove and reinstall a front door panel on this 2004 Chevy Colorado. The only tool you'll need is a Phillips screwdriver.
There are two screws right down in here. Use a Phillips screwdriver to remove these. Pull this up, turn it over, and the screw comes out. These disconnect by pressing on little tabs, pulling out. Disconnect our mirror switch as well. There's a screw you want to remove right in there. Just remove that screw, this bezel comes off, and it just kind of go right around the door panel. Give it a good firm quick pull and remove this up here by pulling up and then out and then the door panel comes right up and off there. There's a little connector here for your speaker. Just press in on a tab.
Before you put your door panel back on, a couple of my clips didn't come with the panel. Just pull them off with pliers. They just slide right in to the panel. Put your panel back on. Hook in your speaker. Hang the panel up right here. Put your harnesses through. Take a peak back here. Make sure your pins are going right into the holes. This, you kind of pull out on the panel a little bit in place, and put this in place. Push it in. Phillips screw. Plug your mirror switch back in and the two connections for the window switch. We'll just fast-forward here as we put those two Phillips screws back in. Tighten them up nice and firm and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Broken Spark Plug Removal Tool
Check out this video if you need a tool to get stuck spark plugs out of your Ford V8 engine! This tool is available at 1AAuto.com
