Menu

1A Auto Video Library
Our how-to videos have helped repair over 100 million vehicles.

How to Remove Front Door Panel 01-06 Chrysler Sebring

Share on:

How to Remove Front Door Panel 01-06 Chrysler Sebring

Created on: 2013-10-25

Watch this video to learn how to remove and replace the front interior door panel on your 01-06 Chrysler Sebring.

  1. step 1 :Remove the anchor points
    • Pry up the plastic plugs behind the door latch and door pull.
    • Remove the six Phillips screws, two under the plastic covers you removed and four around the edge of the door panel.
  2. step 2 :Unclip the door panel
    • Pry up the corner panel piece located by the side mirror.
    • Use your flat blade screwdriver and a rag if needed (to protect your paint) to work the door panel off.
    • Unclasp the door lock rod.
    • Disconnect the wiring harness.
  3. step 3 :Re-install the door panel
    • Clip the door handle/lock rod back into place.
    • Reconnect the wiring harness.
    • Fit the door panel back onto the door and click the clips back into a secure, locked position.
    • Screw in the Phillips screws and replace the plastic plugs behind the door pull and latch.

Tools needed for replacement

  • Screwdrivers & Related

    Flat Blade Screwdriver

    Phillips Head Screwdriver

Installation Video
Watch video


Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the internet. Hi, I'm Don from 1A Auto. I hope this hot-to video helps you out and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.

In this video we're going to show you how to remove and replace the door panel on this 2004 Chrysler Sebring. The only tools that you're going to need for this job are a flat-blade screwdriver and a Phillips screwdriver. There are two trap doors here. There's one right here behind the door handle and another here on the pull cup. All you want to do is take a flat-blade screwdriver and stick it into the slot on the side of them and just pry them out. There are six Phillips screws removed, two behind the pull trap doors you just removed and then four, one up there, and then three down along the bottom of the door panel.

We'll fast forward here as we remove those. Take your flat-blade screwdriver and pry off that triangle panel. To release the clips on the back of the door panel, you just want to pull out all the way around the door panel. Once you've done that, you can lift it up and off of your door lock knob. Behind the back of your door panel you'll see here's your door handle rod. You just want to pop that clip up and pull that up and out. You want to disconnect the two harnesses here by just pushing in the tab and pulling them out. Now, your door panel is free.

To reinstall the door panel, you just want to take that door handle rod, put it back into place and re-clip it and then you want to just reconnect your two harnesses. Once you've done, you want to jus line up your door. Put it up and over the door lock knob and down into place. Then you just want to push those clips in around the edges of the door panel. Just forward as we replace the six screws that holds the door panel. Now, just replace your trap doors and that triangular panel.

We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the internet. Please feel free to call us toll free 888-844-3393. We're the company that's here for you on the internet and in person.

Tools needed for replacement:

    Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver


Search Videos
Go To Top

Same Day Shipping

Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos to guide you step-by-step through your repair.

Loading...