How to Remove Front Bumper Trim 2014-19 Chevy Silverado
Created on: 2019-05-09
Check out this 1A tutorial video to learn how to replace a damaged or faded front bumper trim on your 14-19 Chevy Silverado.
-
step 1 :Removing the Bumper Trim
- Remove the two 7 mm screws from the corner of the bumper trim at the wheel well
- Repeat on the other side
- Pry the bumper trim away starting at the corner moving to the grille
- Repeat on the other side
- From underneath the vehicle, pry the four bumper trim locking tabs
- Pull the bumper trim straight out
-
step 2 :Installing the Bumper Trim
- Replace the bumper trim by pressing it in the center to lock the tabs, and then press to lock in each corner
- Replace the two 7 mm screws at one corner of the bumper trim
- Repeat on the other side
Tools needed
-
Socket Extensions
Pry Bar
7mm Socket
Ratchet
Trim Tool Set
What's up, guys? I'm Andy from 1A Auto. In this video, I'm going to show you how to remove and reinstall this bumper trim piece on this 2015 Chevy Silverado. If you need parts for your vehicle, click the link in the description and head over to 1aauto.com.
I need to take this panel off. I'm going to use a 7mm socket and ratchet and take this screw out. This bolt that goes up, right here—just going to use this 7mm socket. I'm going to use an extension so that I can access it, and a ratchet. Take both of those screws out for the other side. Now we need to pull this panel off. I'm just going to use a little pry bar to get underneath here. Pry this out. There's some clips that are held in, right there, so just be careful. Try not to break them.
It's clipped in right there and right there. That actually came out pretty easily. Pull it forward. Now it's clipped in right here on the front. I'm going to release the clips from underneath. I'm going to grab this from the outside—this trim piece—and then from the inside, I want to release it. There's clips right here, so I'm just going to use a trim tool. There's one back here. Once you get the first one out, the other ones come out pretty easily. I'm going to try to pull from outside the vehicle. I should be able to grab it and just slide it out, just like that.
Next, I'm just going to take this bumper trim and line this up in the front. Get it centered in the front, like that. Then come over to the side and push this side in, and then we'll do the same with the other side. There we go. Take this screw; get this screw started, and then there's another screw that goes through here. Once those are started, take that 7mm socket and the ratchet and tighten these down. Do the same for the other side.
Thanks for watching. Visit 1aauto.com for quality auto parts shipped to your door. The place for DIY auto repair, and if you enjoyed this video, please click the subscribe button.
How to Replace 2006-08 Dodge Ram 1500 Grille
Learn how to replace the grille on the 06-08 Dodge Ram 1500 yourself with this how-to video
