How to Remove Engine Cover 2007-14 Toyota FJ Cruiser
Created on: 2019-07-25
This video will show the simple steps to remove and install the engine cover if it's cracked, split, or broken and needs to be replaced
-
step 1 :Removing the Engine Cover
- Remove the four 10 mm bolts securing the engine cover
- Remove the engine cover
-
step 2 :Installing the Engine Cover
- Clip the engine cover in place, aligning the bolt holes
- Reinstall the four 10 mm bolts to secure the engine cover
Tools needed
-
10mm Socket
Ratchet
Hey, friends. It's Len here at 1A Auto. Today I'm working on a 2007 Toyota FJ Cruiser. I'm going to be removing the engine cover. It's going to be a very easy job and I want to be the guy that shows you how to do it. If you need any parts, you can always check us out at 1AAuto.com. Thanks.
So now I'm going to remove the cover right here. I'm going to use a 10 millimeter. Set those aside. Lift this up, pull it towards you. Slides right off. We'll set this aside.
Okay, it's time to install our engine cover. We've got two little hooky-dos like this. One's going to go here and one's going to go there. This is going to set flat down, and then we've got a little piton there. One there. Going to go in there. Line them up, bring it down, line up the studs with the holes. We've got two nuts. Tight. Tight. Looking good.
Thanks for watching. Visit 1AAuto.com. Your place for DIY auto repairs, for great parts, great service, and more content.
