1A Auto Video Library
Our how-to videos have helped repair over 100 million vehicles.

How To Remove Door Panel 98-03 Dodge Durango

Share on:

How To Remove Door Panel 98-03 Dodge Durango

Created on: 2021-01-16

Check out this video on how to remove the front interior door panels on your 98-03 Dodge Durango.

  1. step 1 :Remove the door panel
    • Remove the five Phillips screws in the door panel.
    • Disconnect the wiring harness connections and unclip the door latch rod.
  2. step 2 :Install the door panel
    • Clip in the door latch rod.
    • Connect all the wiring harness connections.
    • Clip the door panel on and secure with the five Phillips screws.

Tools needed for replacement

  • Screwdrivers & Related

    Phillips Head Screwdriver

Installation Video
Watch video

Brought to you by, your source for quality replacement parts and the best service on the internet. Hi, I'm Mike Green. I'm one of the owners of 1A Auto. I want to help you save time and money preparing and maintaining your vehicle. I'm going to use my 20-plus years experience restoring and repairing cars and trucks like this to show you the correct way to install parts from, the right parts installed correctly. That's going to save you time and money. Thank you, and enjoy the video.

In this video, we'll be showing you how to remove and reinstall the door panel, the front door panel on this Dodge Durango. It's a 1998. The process is the same for pretty much 98 to '03. The only tool you'll need is a Phillips screw driver. First, you're going to remove five Phillips screws. There's two underneath, one there, then one here by the back, then one right underneath the door pool there, one right near the mirror up here, and then one in behind your door handle right there. You want to remove those screws. You will lift up on the door panel, and then pull it out. Then, as you're pulling it out, there's a connector here for your mirror switch. There's a tab right there you pull up and out. There is a clip here for your door handle lock. You use your finger and push around and pull that up and out.

Then, there's a connector here for your window switch that you basically grab a hold of. You can either pull it down and off, which is sometimes difficult. Pull it down and off. Your other thing you could do is if you can't pull that down and off, there are just three screws that hold the switch on, so you can just use a Phillips screw driver and pull that switch off. There you go, your door panel is off. To reinstall, it's just a reverse of the procedure. Make sure down here is the lock to push your lock through. Then reconnect your window switch. Reconnect your door handle rod. Then, reconnect your mirror switch. Pull the lock rod through. Put the handle up to control your clips go into place. Push against the door and slide it down and reinstall your screws.

We hope this helps you out. Brought to you by, your source for quality replacement parts and the best service on the internet. Please feel free to call us toll free, 888-844-3393. We're the company that's here for you on the internet and in person.

Tools needed for replacement:

    Screwdrivers & Related

  • Phillips Head Screwdriver

Search Videos
Go To Top

Same Day Shipping

Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos to guide you step-by-step through your repair.