1A Auto Video Library
Our how-to videos have helped repair over 100 million vehicles.
How to Remove Bumper 2013-18 Subaru Forester
Created on: 2019-05-13
This video will show you how to remove and reinstall the bumper cover safely and properly
-
step 1 :Removing the Bumper Cover
- Pry out the push-pins underneath the bumper with a flat blade screwdriver
- Disconnect the fog light wiring harnesses
- Remove the push-pin attaching the fender well to the bumper on each side
- Pull the sides and edges of the bumper out from the fender well on each side
- Pry up the push-pins from the top of the bumper
- Lift the bumper up and off
-
step 2 :Installing the Bumper Cover
- Insert the bumper cover into place
- Press in the push-pins along the top of the bumper
- Press the sides of the bumper in
- Attach the push-pin attaching the fender well to the bumper on each side
- Connect the fog light wiring harness
- Press in the push-pins underneath the bumper
Tools needed
-
Flat Blade Screwdriver
Trim Tool Set
Wheel Vibration on the Highway Could be Out of Balance
Have your wheels started shaking or vibrating while driving at higher speeds recently? If it's not snow stuck in your wheels, it could be an out of balance tire.
Go To Top
