1A Auto Video Library
Our how-to videos have helped repair over 100 million vehicles.
How to Remove Bumper 2013-18 Subaru Forester
Created on: 2019-05-13
This video will show you how to remove and reinstall the bumper cover safely and properly
-
step 1 :Removing the Bumper Cover
- Pry out the push-pins underneath the bumper with a flat blade screwdriver
- Disconnect the fog light wiring harnesses
- Remove the push-pin attaching the fender well to the bumper on each side
- Pull the sides and edges of the bumper out from the fender well on each side
- Pry up the push-pins from the top of the bumper
- Lift the bumper up and off
-
step 2 :Installing the Bumper Cover
- Insert the bumper cover into place
- Press in the push-pins along the top of the bumper
- Press the sides of the bumper in
- Attach the push-pin attaching the fender well to the bumper on each side
- Connect the fog light wiring harness
- Press in the push-pins underneath the bumper
Tools needed
-
Flat Blade Screwdriver
Trim Tool Set
Squealing Vent Noise in Your Car or Truck How to Check Blower Motors
Andy shows you the difference between an old blower motor with a worn bearing, and a brand new blower motor, to see how and old one can make that awful noise.
Go To Top
