How to Remove Bumper 2000-07 Volvo V70

Installation Instructions Steps

Created on: 2019-01-17

How to replace the bumper on 00, 01, 02, 03, 04, 05, 06, 07 Volvo V70

step 1 :Removing the Bumper Cover
- Remove the plastic clips from the top of the bumper cover
- Pry off the black trim pieces from the exterior of the bumper cover with a trim tool
- Lift the cap of the headlight wiper arm
- Remove the 8mm bolt from the headlight wiper arm
- Press the wiper arm up in and out to loosen and remove
- Remove the 12mm mounting bolts from the front of the bumper cover
- Remove the T20 Torx bolt from the wheel well
- Pull out the bumper cover
- Disconnect the sensor harness
- Disconnect the headlight wiper arm with a flat blade screwdriver
- Disconnect the second sensor wiring harness
step 2 :Installing the Bumper Cover
- Press the bumper cover into place
- Connect the headlight wiper arm to the washer hose
- Connect the sensor wiring harnesses
- Tighten the T20 Torx bolt to the wheel well
- Tighten the 12mm mounting bolts to the front of the bumper cover
- Press the wiper arm into place
- Tighten the 8mmm bolt to the headlight wiper arm
- Press on the black trim pieces to the exterior of the bumper cover
- Press on the plastic clips to the top of the bumper cover

Tools needed

Gloves

Socket Extensions

T20 Driver

8mm Socket

Ratchet

Trim Tool Set

How to Replace Rear Ground Effects Spoiler 1982-92 Chevy Camaro IROC Z

How to remove, replace and install the rear ground effects and spoiler on a third generation Chevy Camaro IROC Z. This video applies to year models 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, and 92.