How To Remove 3rd Third Brake Light Bulb 2012-19 Nissan Versa
Created on: 2018-09-19
How to install, repair, fix, change or replace a broken, damaged, burned out, cracked, faded, cloudy or chipped third brake light on 14 Nissan Versa
-
step 1 :Removing the Old Bulb
- Open the trunk
- Locate the bulb socket
- Twist it counterclockwise
- Remove the bulb socket
- Disconnect the electrical connection
- Pull the bulb straight out of its socket
-
step 2 :Reinstalling the New Bulb
- Line up the bulb
- Press it in until it locks in place
- Line up the socket
- Twist it clockwise to lock it in
- Test to make sure it functions correctly
Hi, I'm Mike from 1AAuto. We've been selling auto parts for over 30 years.
Take the key. Open the trunk.
To get the third brake light bulb out, there's a little socket right under here. You go in here.
Twist it to the left. Pull the socket down just like that. To disconnect the wiring harness, there's a little tab right here. Disconnect that. Pull the socket off.
To remove the bulb from the socket, just grab it with your hands and pull it straight out just like that. This is a 921 bulb.
To reinstall the bulb, just line it up with the socket. Push it in and then we'll reinstall it in the car.
Now we're gonna reconnect the connector first. Line it up. The connector goes that way. Once that's connected, then we can reinsert it. This is a little bit tricky. Once you get it in, then we're gonna twist it clockwise and lock it in place.
Now that it's in there, we can test it and make sure it works.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
Differences Between Tapered Bearings and Ball Bearings
The difference between tapered bearings and roller ball bearings. If you have a truck or large car, tapered bearings are the better choice. TRQ offers tapered bearings for these models, when other brands use roller ball bearings
