How To Remove 3rd Brake Light 2000-07 Volvo V70
Created on: 2014-03-26
How to install, repair, fix, change or replace a broken, damaged, burned out, cracked, faded, cloudy or chipped third, high mount brake light on 02, Volvo V70.
-
step 1 :Removing the Tailgate Panel
- Remove the four T25 Torx bolts from the tailgate panel
- Pull down the lower tailgate panel
- Pull down the upper tailgate panel
-
step 2 :Removing the Third Brake Light
- Disconnect the brake light wiring harness
- Pry the plastic clip out of the third brake light
- Slide the light to the left and pull it off
-
step 3 :Installing the Third Brake Light
- Push on the brake light and slide it to the right
- Push the plastic clip into the tail light
- Connect the brake light wiring harness
-
step 4 :Installing the Tailgate Panel
- Push in the upper tailgate panel
- Push in the lower tailgate panel
- Insert the four T25 bolts into the tailgate panel
Tools needed
-
Flat Blade Screwdriver
Ratchet
T25 Torx Socket
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the third brake light on this 2002 Volvo V70. The items you'll need for this is a T25 Torx bit and ratchet and a flat blade screwdriver.
Start off by removing these four T25 Torx bolts that line this trunk panel. We'll fast forward as Don removes those. Now just pull down on the panel and it will release the clips and pull free. Then do the same to this top panel. Your third brake light is right here. You want to just push the tab on this harness and pull it free, and then push the center of this clip in, and then pry it out. Now slide the light to the left and pull the light free.
Take your new third brake light, push those tabs in, and slide it to the right. Then replace that clip, take the center out, and put it in through the top. Don't push it down until you push the clip back into place. Then reconnect the harness. Then line up the clips on this panel and push it into place. Do the same thing with this panel. Just hit those clips in. Now replace those T25 screws and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
How to Replace Third Brake Light 2003-07 Cadillac CTS
How to install, repair, fix, change or replace a broken, damaged, burned out, cracked, faded, cloudy or chipped third brake light on 06 Cadillac CTS
