Created on: 2014-07-23
How to jack up and support your vehicle on 00, 01, 02, 03, 04, 05, 06, 07 Chevy Monte Carlo.
Jack Stands
Floor Jack
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
If you're looking to lift up your Monte Carlo, there are specific places to raise it. You want to put the jack anywhere underneath. This raised lip is actually a cut out right here where you can put a jack. You can see ours is further back just because our lift is a little larger. You would want to lift it up here and then support it with a jack stand a little further forward.
If you wanted to raise both tires at the same time you can just come right under the middle and put your jack right under here. Raise it up and then put jack stands on each side underneath the pinch weld.
Going to the front, it's the same thing. You can see this car is actually a little bit rusty so my lift is going right up into the body. There's a pinch weld here that you can support it with. You could jack it on this aluminum subframe.
You could also place a jack underneath the control arm to raise it up, and raise it up and then put the jack stand underneath the pinch weld. If you're looking to do both at the same time you could raise it by putting a jack underneath this aluminum bar that's going across. Do not put it under the transmission pan or the oil pan. Again, like I said, you could raise it up underneath here and then support it with jack stands on each side.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.