How to Raise and Support 2014-19 Toyota Tundra
Created on: 2018-04-02
How to raise and support your vehicle on 14 Toyota Tundra
-
step 1 :Placing the Jack and Jack Stands
- Jack up from the front crossmember
- Place the jack stands on the side frame rails
- At the rear, jack up from the differential
- Place the jacks underneath the side frame rails or underneath the leaf spring perches
Tools needed
-
Jack Stands
Floor Jack
Hi, I’m Mike from 1A Auto. We’ve been selling auto parts for over 30 years!
To raise and support your vehicle, we've got it one our two post lift. But if you're doing this on the ground, with a jack and jack stands, full frame trucks are pretty easy. You can slide a rolling jack under here, lift it up in the front. Right underneath this cross member. And then you've got the frame rails that you can put your jack stands, right underneath the frame rail on both sides.
And if we walk to the back, you can jack up on the rear diff, and lift the truck up with your rolling jack. And then you could place your floor jacks underneath your spring perches if you want to, or if you need to work on the rear leaf springs, you can move your jack stands up and put them underneath the frame rails up here. But of course, since we're on a two post lift, we've got an extra floor jack because the vehicle's long, just for extra support.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
Car or truck pulling to one side on the highway Time for new tie rods or just an alignment
Sue shows you how to check out steering that drifts and pulls, so you will know if it's time to order some new tie rods!
