How to Raise and Support 2008-12 Honda Accord
Created on: 2018-02-23
How to raise and support your vehicle on 08 Honda Accord.
-
step 1 :Raising and Supporting the Vehicle
- Place the floor jack under the subframe
- Lift the vehicle with the jack
- Place the jack stands under the frame seams
- To raise the rear, place the jack under the rear crossmemeber
- Lift the vehicle with the jack
- Place the jack stands under the frame seams
Tools needed
-
Jack Stands
Floor Jack
Hi. I'm Mike from 1AAuto. We've been selling auto parts for over 30 years!
To raise and support this vehicle you could put your floor jack right here on this side of the subframe, or on the other side of the subframe, and jack it up. There are a couple spots here on the other side of our lift arms. You could put a jack stand under here, this high spot on the seam. It's the same for both sides. You could jack up the front of the car.
For the rear of the car, I'd use your floor jack here, lift it up, and again put your jack stands under here, on the pinch welds right here where there's this edge. That's the reinforced part. It’s the same for both sides.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
Cant Remove Shock Absorber From Rusty Mounting Stud Try These Removal Tricks
Andy shows you some tips to get a rusty shock absorber off a mounting stud, even if the bushing and inner ring get left behind!
