How to Raise and Support 2002-07 Subaru Impreza WRX
Created on: 2017-10-20
How to raise and support your vehicle on 04 Subaru Impreza WRX
-
step 1 :Jacking Up the Front
- Jack up underneath the front crossmember
- Place jack stands on the subframe or the pinch weld
-
step 2 :Jacking Up the Rear
- Jack up from underneath the rear differential
- Place the jack stands on the subframe or pinch weld
Tools needed
-
Jack Stands
Floor Jack
Hi, I’m Mike from 1A Auto. We’ve been selling auto parts for over 30 years!
Got this support on a two-post lift, but if you were going to jack this up on your driveway, you could roll a floor jack right under here and jack it up, and then you could put jack stands under here, the subframe, and on this side. Or, you could put them under the jack points here where our lift is sitting on both sides, so if you're using a two-post lift, you need to jack it up here or on the pinch welds.
If you're going to work on the rear of the car, you can put a jack right here under the rear differential and lift it up, and you can put jack stands right under here on the subframe will work for you, or right here on the pinch weld is probably even easier.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
Your headlights are old pitted and yellow Refinish or replace
Sue weighs out the pros and cons of trying to restore old headlights versus replacing them.
