1A Auto Video Library
Our how-to videos have helped repair over 100 million vehicles.

How to Raise and Support 10-17 GMC Terrain

Share on:

How to Raise and Support 10-17 GMC Terrain

Created on: 2021-01-16

How to jack up, lift and support an 14 GMC Terrain

  1. step 1 :Raising and Supporting the Vehicle
    • Find the arrow marks on the rocker panel
    • Place the jack underneath the pinch weld where the arrow pints
    • To raise the front, place the jack underneath the engine subframe
    • To raise the rear, place a jack underneath the supporting subframe or the unibody braces
    • Raise the vehicle with the jack
    • Support the vehicle with jack stands

Tools needed for replacement

  • General Tools

    Jack Stands

    Floor Jack

Installation Video
Watch video

Hi, I'm Mike from 1A Auto. We've been selling auto parts for over 30 years. We're dedicated to delivering quality auto parts, expert customer service, fast and free shipping, all backed by our 100% satisfaction guarantee. Visit us at, your trusted source for quality auto parts.

Under the vehicle, there's a few spots that you can put a jack or a jack stand. You can see we have the lift on these spots. On the outside of the rocker panel, there's actually arrows pointing to where these safe spots are to jack up. Right here, you can see the arrow. That's exactly where we put the lift point. You can put a jack or a jack stand there as well.

On the rear, it's the same story. There's an arrow right on the rocker panel area. You can actually put the jack right inside there along the pinch weld. That's a safe spot to support the vehicle.

Towards the front of the car, most of this front subframe right here and along this side: it's all made of steel. It holds the engine into the car. It's pretty safe to jack up the vehicle on or put a jack stand under. You don't want to put a jack under anything that's aluminum. Like this right here, this is your transmission and transfer case right here and here. You don't ever want to put a jack or a jack stand under those. Right here is your oil pan, so you want to stay from that as well. You never want to jack up anything on aluminum.

There's also control arms. Control arms are typically safe to jack up the vehicle from, but jack stands are a little sketchy, because as you can see, they're at an angle. Sometimes they'll flex with the car. I prefer to always put the jack stands under something that's solid and doesn't move, like this subframe.

Towards the back of the car, there's more spots where you can jack up the vehicle. You can jack it up from the control arms. Again, I probably wouldn't put the jack there, but you could put a jack right under the supporting subframe because that's made out of solid steel. Then we also have these unibody braces right here and right here that would be perfectly safe to put a jack stand under as well, or jack up the vehicle with a floor jack.

Thanks for watching. Visit us at for quality auto parts, fast and free shipping, and the best customer service in the industry.

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

Search Videos
Go To Top

Same Day Shipping

Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos to guide you step-by-step through your repair.