How to Raise and Support 2000-07 Toyota Highlander
Created on: 2018-02-27
How to raise and support your vehicle on 04 Toyota Highlander.
-
step 1 :Jacking Up the Vehicle
- Jack up on the center of the front sub-frame
- Jack up and place stands on the pinch weld
- Jack up and place stands on the frame channel
- For the rear, lift up from the center of the subframe
- Place the jack stand in the frame rail
Tools needed
-
Jack Stands
Floor Jack
Hi, I’m Mike from 1A Auto. We’ve been selling auto parts for over 30 years!
To raise and support our vehicle, put a floor jack right on here on the sub frame and lift up the front of the vehicle. And over here in the frame rails actually where our lift arms are. There’s two notches cut out in the frame rail. That's where you want to put the jack stand right there on either side so you could jack it up in the center and the front. Put a jack stand on the side. Or if you just want to work on side of the vehicle, you could roll a jack under here. Jack it up in the subframe, lift it up, put your jack stand under here on the frame rail, move your tire wheel, and do your work.
At the back of the vehicle, you can roll in a floor jack and put it right here. Lift up on the subframe. And then again where our lift arms are, there's two notches in the frame rail on both sides. And you can put your floor jacks under here and support the vehicle. Sometimes it's easier just to jack up in the single point in the back and then put two jack stands. And you can take off your wheels and do your work.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
Diagnosing Coolant Smells and Leaks Coming From Your Car SUV or Truck
This video shows you how to diagnose a coolant system for leaks.
