Created on: 2018-05-25
How to jump start with a booster jump pack on 2009 Chevy Suburban
Hi. I'm Mike from 1AAuto. We've been selling auto parts for over 30 years!
I'm going to try and start our vehicle. The battery's dead. I'll take the key out of the ignition, get our little booster pack and go under the hood.
This booster pack works with engines up to 5.4 liters. This has the 5.3, so it should be about the maximum you'd want to do with this.
So we'll take our cables out. We'll hit the on button. It's fully charged. Open up this little door here, where it shows the car. Put our connector in. It only goes in one way. It's keyed. Now these are live. It tells you with this nice little light-up LED. And these wires are long enough, so we'll go in here.
Open up the positive terminal. Get them on here. Then get the negative on. This LED lights up green here, to show that you have good continuity, and it's a good connection.
Put the key in. Start it up. Once it's running, disconnect your negative terminal. Disconnect the positive. Shut this off by holding the button. Disconnect it and you can put this away and continue on your trip or wherever you need to go.
Hopefully, your battery was only dead because maybe you left the lights on, but if there's another problem, you should have that checked out, but at least you're not stranded, by having this in your vehicle. You can buy these from 1Aauto.com.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
Need to replace a wheel hub bearing on your trailer? This 1A video will show you how!