How to Install Replace Rear Wiper Blade 2007-11 Honda CR-V
Created on: 2018-07-05
How to repair, install, fix, change or replace a damaged, bent, or failing windshield wiper blade on 09 Honda CR-V
-
step 1 :Removing the Wiper Blade
- Pull up the wiper arm
- Tilt the wiper blade and slide it off of the arm
-
step 2 :Replacing the Wiper Blade
- Line up the wiper blade slots with the wiper arm tabs
- Snap the blade into place
Hi, I'm Mike from 1A Auto. We've been selling auto parts for over 30 years.
To replace the rear wiper blade, what we're going to do is grab the arm and the blade. I'm going to twist it up. Take the blade itself, and you're going to twist it like that, and it's going to pull right out. To install a new blade, we're going to hold it. You're going to slide the arm into this slot right here, just like that. Push it into the slot there, and then twist it down. Just like that, and push it down.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
Bad Inner Tie Rod End On Your Car or Truck Is It True I Should Replace Them in Pairs
Len points out some of the things that could go wrong if you want to replace just an inner or outer tie rod alone, and why it just might make sense to replace them both together at the same time!
