How to Install Replace Rear Wiper Blade 2007-11 Honda CR-V
Created on: 2018-07-05
How to repair, install, fix, change or replace a damaged, bent, or failing windshield wiper blade on 09 Honda CR-V
-
step 1 :Removing the Wiper Blade
- Pull up the wiper arm
- Tilt the wiper blade and slide it off of the arm
-
step 2 :Replacing the Wiper Blade
- Line up the wiper blade slots with the wiper arm tabs
- Snap the blade into place
Hi, I'm Mike from 1A Auto. We've been selling auto parts for over 30 years.
To replace the rear wiper blade, what we're going to do is grab the arm and the blade. I'm going to twist it up. Take the blade itself, and you're going to twist it like that, and it's going to pull right out. To install a new blade, we're going to hold it. You're going to slide the arm into this slot right here, just like that. Push it into the slot there, and then twist it down. Just like that, and push it down.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
Why Tire Pressure Is Important
How to check your tire pressure, and why properly inflating your tires will reduce your help your fuel mileage
