Menu

1A Auto Video Library
Our how-to videos have helped repair over 100 million vehicles

How to Replace Radiator Cooling Fan Assembly 97-98 Ford Mustang

Share on:
  1. step : Removing the Radiator Fan (1:14)
    • Remove the 7mm bolt from the coolant tank bracket
    • Pull the coolant tank aside
    • Disconnect the coolant overflow hose
    • Pull the wiring harness pins out of the radiator fan
    • Disconnect the radiator fan wiring harness
    • Remove the two 8mm bolts from the radiator fan
    • Pull the fan up and out, rotating it to the driver side
  2. step : Installing the New Radiator Fan (2:26)
    • Put the new radiator fan into place rotating it to the passenger side
    • Push the fan into its slots
    • Insert the two 8mm bolts into the radiator fan
    • Connect the radiator fan wiring harness
    • Clip the wiring harness into the radiator fan
    • Push the coolant tank into place
    • Insert the 7mm bolt into the coolant tank bracket
    • Connect the coolant overflow hose

Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.

Hi, I'm Mike Green. I'm one of the owners of 1A Auto. I want to help you save time and money repairing or maintaining your vehicle. I'm going to use my 20-plus years experience restoring and repairing cars and trucks like this to show you the correct way to install parts from 1AAuto.com. The right parts installed correctly: that's going to save you time and money. Thank you and enjoy the video.

In this video, we go over removing and replacing a radiator fan on this 2000 Ford Mustang. This vehicle has the 3.8 liter V6. The fan for the V8 is a little different but the procedure is pretty much the same. For this vehicle, all that you'll need is a 7 millimeter and an 8 millimeter socket with ratchet. As far as whether or not your radiator fan is bad, your radiator fan should always work when the air conditioning is on. If it's not working, first check the relays and fuses and if those are good and you're getting power to your fan, then you need to replace the fan.

There's a 7 millimeter bolt right here that holds your coolant tank. Now we'll just speed it up as I remove that bolt. Pull up on this brace to just kind of get that out of your way. Remove the hose here. Now you'll want to just kind of pull your harness. There's a series of pins. Pull them. You can just shake back and forth to pull them out. Then, for your connector, there's a tab that you push down on in here and pull that off. Then, you remove two 8 millimeter bolts: one here and one right over here. Just fast forward here again as I remove those two 8 millimeter bolts. Then To remove it, pull it up on one side, and up on the other side. Pull it back a little bit. You'll have to hit passenger side down and rotate this side up and right out.

On the right side, is my original and on the left, is the new fan from 1A Auto. The original is working fine in this vehicle. So, I'm not going to unwrap a new one. As you can see, they're packed very nicely, but the new is the exact same shape. It's going in there the same and the connector will plug right in and you'll be all set to go. Reverse it, put the passenger side down and in, and make sure you pull your connector out of the way, and lower the driver side down and in. Get it roughly in place. Then, down below, you can see that metal slot down there. There is a tab on the fan, you pull up and make sure it goes into that slot. Now, pull it back and make sure that each side goes into the sliding tab. We can start our two 8 millimeter bolts back in. We'll speed it up, again, here, as we just tighten up those two 8 millimeter mounting bolts. Now, plug in our harness connection and then put these tabs back into place. Put our radiator bottle back into place. We'll just speed it up here as we put that bolt, the 7 millimeter bolt, in to hold the coolant tank, and then, make sure that you plug your overflow hose back on.

We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 7mm Socket
  • 8mm Socket

1997 - 1998  Ford  Mustang

3.8L Radiator Cooling Fan Assy

1997-98 Ford Mustang Radiator Cooling Fan Assembly

This part replaces:

  • Partslink FO3115130
  • Hollander 674-00335, 674-00364
  • Dorman 620-109
  • TYC 620480
  • DEPO 330-55009-000
  • OE # F7ZZ 8C607 BB/ F8ZZ 8C607 BA
How To Replace Water Pump 01-07 3.3L/3.8L Dodge Caravan

How To Replace Water Pump 01-07 3.3L/3.8L Dodge Caravan

Watch this video to learn how to replace your own water pump. The experts at 1A Auto show you how to replace the water pump on your 01-07 Dodge Grand Caravan or Chrysler Town and Country.

Search Videos
Go To Top

FAST & FREE
SHIPPING

Same Day Shipping

In stock orders ship same day when ordered by 4pm ET. Need your parts faster? Select expedited shipping at checkout.

QUALITY
AUTO PARTS

Guaranteed to Fit

Our team of auto experts work hard to provide you with the highest quality, direct fit replacement auto parts. We know not all auto parts are created equal. This is why we enforce a strict level of product standards and sourcing with every part.

EXPERT USA
CUSTOMER SUPPORT

USA Customer Support

Our goal is to exceed our customers' expectations every day. We are a team of passionate auto enthusiasts who are here to help. If you have a question about our parts or a repair contact us.

HOW-TO
VIDEOS

Instructional Video Library

Our 1A Auto Video Library has thousands of how-to auto repair installation videos specific to year, make and model. Each video guides you with step-by-step instructions to empower you to tackle your own repairs on your car, truck, SUV, or van.

Loading...