How To Install Replace Front Hood Grill Molding Trim 2001-06 Hyundai Elantra
Created on: 2013-05-14
How to remove, install, fix, change or replace a broken, or ripped off grille molding trim on 2001, 2002, 2003, 2004, 2005, 2006 Hyundai Elantra.
-
step 1 :Removing the Grille Trim Piece
- Remove the four 10mm buts from the grille trim piece
- Pull off the grille trim piece
-
step 2 :Installing the Grille Trim Piece
- Put the grille trim piece into place
- Fasten the four 10mm nuts onto the grille trim piece
Tools needed
-
10mm Wrench
10mm Socket
Ratchet
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video we'll replace the plastic trim in the front of the hood on this 2005 Hyundai Elantra. It's the same as a 2001 to 2006. It's a pretty easy operation; all you need is either a 10mm wrench or a 10mm socket and ratchet.
I've located the four plastic 10mm nuts. It pulls right out.
To install is simple enough. Just thread the four plastic fasteners back on and then tightened them up. You don't want to make them too tight, just snug enough that it'll fit and not move around.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
How to Replace Upper Grille 2011-14 Chevy Cruze
Grilles on today’s vehicles are for the most part plastic. And, they are often the first point of contact between your vehicle and rocks, debris, or worse. Even though the Cruze upper grill is cosmetic, you'll still want to replace it to keep your car looking sharp. How to install a new made to fit TRQ upper grille on your 2011-14 Chevy Cruze.
