How To Install Replace Camshaft Position Sensor 2000-07 Ford Focus 2-0L
Created on: 2014-01-31
Check out this video to learn how to replace the camshaft position sensor on your 00-07 Ford Focus 2.0L
-
step 1 :Removing the Camshaft Position Sensor
- Remove the 8mm bolt from the camshaft position sensor
- Pull the camshaft sensor up and off
- Disconnect the camshaft sensor wiring harness
-
step 2 :Installing the Camshaft Sensor
- Push the new camshaft position sensor into place
- Insert the 8mm bolt into the camshaft sensor
- Connect the camshaft sensor wiring harness
Tools needed
-
8mm Socket
Ratchet
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the camshaft position sensor on this 2005 Ford Focus with the 2 liter 4 cylinder engine. The only tool you'll need for this is an 8mm socket and a ratchet.
The cam shaft position sensor is located right here. It's held in with an 8mm bolt. We'll just fast forward as Don removes that bolt. Once that's removed, pull the sensor up and out. On the underside of that harness, push the tab and pull it free.
Take your new position sensor and push it down into place. Replace that 8mm bolt. Reconnect your harness and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Check Engine Light Camshaft Position Sensor Circuit High Input - Code P0343
This video explains the code P0343, and shows you how to diagnose and repair it.
