How To Install Remove Rear Door Panel 1999-2002 GMC Sierra
Created on: 2011-06-20
Check out this video teaching you how to remove or replace the rear interior door panels on your 99-02 GMC Sierra.
-
step 1 :Remove the door panel
- Remove the two 7 mm bolts with your socket and ratchet.
- Pry out your power lock switch and disconnect the wiring connector.
- Do the same for the power window switch panel.
- Pry out the door handle bezel and set it aside.
- Pull the courtesy light out and disconnect the lead.
- Remove the door panel.
-
step 2 :install the door panel
- Thread the wiring through the panel
- Secure with the two 7 mm bolts.
- Connect your courtesy light and clip it in.
- Do the same with your power lock switch and power window switch panel.
- Clip the door handle bezel down.
Tools needed
-
Socket Extensions
Flat Blade Screwdriver
7mm Socket
Ratchet
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet. In this video we're going to show you how to remove and put back on the interior door panel on the rear door on this 2002 GMC crew cab. This procedure could be slightly different if you have a 2003 or later truck. The only tools you'll need are a regular screwdriver, a 7 millimeter socket with ratchet and extension.
They are two 7 millimeter screws that you have to remove. They are bolts, one right in there and then one down the bottom over here. As well, you need to pry out this trim panel, pry out your lock button and pry out your window switch and disconnect it. First get your finger under, pull out that bezel, regular screw driver, stick it in the front there, lock your lock button, another switch also pry up gently there, in the front of it and then there's a little tab, get your screwdriver, push on it, hold the connector down and out and also pry out your light reflector, disconnect it, then your 7 millimeter socket ratchet extension.
Okay, we'll just speed up here as we remove those two 7 millimeter bolts. Once everything's unbolted and you just lift up on your panel and it comes off. Put your handle back on, make sure you bring this right up through here. Bring your courtesy light through. Get the white plastic legs down there. Get them resting in the door like that. Push the panel against the door. Slide it down nice and easy. Then this bolt next to the arm rest, I just put that in backwards.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Difference Between Brake Pad Materials What Are Brake Pads Made Of Car Brake Pads and Rotors
Sue teaches you the differences in brake pad materials, and what it means for your application.
