How to Install Rear Doors 2006-18 Jeep Wrangler

Hi, I'm Mike with 1A Auto. We've been selling auto parts for over 30 years.

What's up, guys? I'm Andy from 1A Auto. Today I'm going to show you how to install the rear doors on this 2015 Jeep Wrangler.

If you need parts for your vehicle, click the link in the description and head over to 1aauto.com.

All right. Now we're going to take the rear door. Line up the hinges. Just like that. And just wiggle it back and forth if they're not all the way down.

Once they're all the way down, go to the inside of the door. With the front seat all the way up, I'll just take a trim tool. Pull this cover back off. Just like that. And we can slide this wiring connector through here, and this braided strap. It's going to hold the door from opening all the way. And we're going to slide this braided strap over this hook. Just like that. Connect this connector right up under here. Lock it in place.

And we can take this cover. Line it up and get the bottom part. And those two tabs right there--slide those on, and lock it in place.

Slowly just make sure the door lines up. As long as those are all the way down, it should be good. Close the door.

I'm going to open the rear gate. Underneath here. I'm going to take these screws out. I'm going to take my T50 bit and install these screws. Get that started there. Get this one started.

And I can take a ratchet. I can just snug them up. Just be careful not to scratch the paint. Try to keep your hand behind the ratchet. Just going to snug that up. Not too tight. Do the same for the bottom one. Snug.

And we'll do the same procedure for the passenger side.

Thanks for watching. Visit us at 1aauto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.