How to Fix Engine Start Problem 1993-97 Dodge Intrepid
Created on: 2011-09-15
If you are having trouble getting your Dodge Intrepid started, check out this video for some helpful tips!
-
step 1 :Removing the Engine Fuse
- Open the fuse box
- Read the diagram and locate the engine fuse
- Remove the engine fuse
-
step 2 :Installing the Engine Fuse
- Insert the engine fuse into place
- Close the fuse box
- Start the engine
Brought to you by 1AAuto.com. Your source for quality replacement parts and the best service on the internet.
This video is for all you '93 to '97 Intrepid owners that have shut your car off and then went to start it and it wouldn't start, sort of like this next clip. What you want to look at here, there's a little fuse block right here. Pull this cover up and off. You can see a bank of fuses here.
You can see the little silver tabs in it. Notice this sill this one doesn't have a tab, that fuse is blown. If you put this and compare it, you can see it's a 20 amp 1P engine controller. We'll pull that one out. Take a new one.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
How to Remove Traction Control Switch 2002-07 Mazda 6
How to repair, install, fix, change or replace a damaged, worn out, faulty or shorted power traction control switch on 07 Mazda 6.
