How To Do an Engine Oil Change 1998-2006 Suzuki XL-7
Created on: 2014-02-26
Watch this video to learn how to do an oil change on your 98-06 Suzuki XL-7.
-
step 1 :Draining the Oil
- Raise the vehicle on jack stands
- Place a drain pan underneath the drain
- Remove the 17mm bolt from the drain
- Drain the oil
- Twist on the 17mm drain bolt
- Tighten the bolt with a 17mm wrench or socket and ratchet
-
step 2 :Removing the Oil Filter
- Place the drain pan underneath the oil filter
- Remove the oil filter with an oil filter wrench
- Clean the area with a rag
-
step 3 :Installing the Oil Filter
- Place a layer of oil around the rim of the oil filter
- Twist the oil filter into place
-
step 4 :Servicing the Oil
- Remove the oil cap
- Place a funnel into the oil fill
- Replace the oil to the recommended amount
- Replace the oil cap
- Start the vehicle and let it run
- Turn the vehicle off
- Check the oil level with the dipstick
Tools needed
-
Funnel
17mm Socket
Drain Pan
Ratchet
Cloth Rags
Engine Oil
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to do an oil change on this 2002 Suzuki XL-7 with the 2.7-liter V6 engine. The items you need for this is a 17mm socket and ratchet, a drip pan, a rag, oil, and oil filter.
The oil pan and drain plug are located right here. Make sure you have a drip pan underneath. Using a 17mm socket and ratchet, remove the drain plug. When oil stops draining out replace the drain plug and tighten it up. Your oil filter is located just above the oil pan on the driver's side right here. Make sure your drip pan's underneath it and then twist it out.
Wipe up the area where the oil filter was and also wipe up the excess oil that poured out. Take some fresh oil and wipe it around the rim of your new oil filter and fit the filter back up into place. Just twist it in until it's tight.
Remove the oil cap and replace the oil. For us it was about five corks. Replace your cap. Start the vehicle and let it run for several seconds. After you run the vehicle, just recheck the vehicle and be sure you've filled the oil up to the proper level.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
How To Change Engine Oil 2000-07 Ford Focus
Learn how to change the engine oil in your 00-07 Ford Focus with this video from 1A Auto. Oil changes are a great way to get started as a car DIYer
