How to Check and Fill Windshield Washer Fluid 2007-11 Honda CR-V
Created on: 2018-06-29
How to check and fill your power steering fluid on 09 Honda CR-V
-
step 1 :Opening the Hood
- Pull the hood latch
- Release the safety latch
- Insert the prop rod
-
step 2 :Checking the Fluid
- Locate the windshield washer reservoir
- Remove the cap
- Check the fluid level using the indicator
- If needed, add fluid until full
- Clip the cap back on
-
step 3 :Closing the Hood
- Remove the prop rod
- Close the hood firmly
Hi, I’m Mike from 1A Auto. We’ve been selling auto parts for over 30 years!
We're going to release the hood right by this foot rest, grab the lever right there, and pull it out. Now, we're going to pull up on the hood, the release is right here, just push that up, release the hood. You can grab the prop rod right here, pull it up, and stick it right there.
Your washer fluid cap is right here on the passenger side, you can pull on this tab that says pull. Pull that up.
Slide this, this is your indicator to see how much fluid is in there. You can just wipe this indicator off. Then, we'll stick it back in, see how much fluid we have. Pull it up again. It looks like it's about half full. As you can see, these are half marks, so we can add a little bit of wash fluid. There we go. We can insert the cap and click it down.
To close the hood we're going to pull the prop rod out, put it back in its holder, and drop the hood.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
Can a Car or Truck Run with No Battery How Vehicle Alternator and Electrical System Works
Len demonstrates how the alternator both charges the battery, and provides the electrical needs of your car or truck while it's running.
