1A Auto Video Library
Our how-to videos have helped repair over 100 million vehicles.

How to Check and Fill Engine Coolant 07-11 Honda CR-V

Share on:

How to Check and Fill Engine Coolant 07-11 Honda CR-V

Created on: 2018-06-29

How to check and fill your power steering fluid on 09 Honda CR-V

  1. step 1 :Opening the Hood
    • Pull the hood release latch
    • Release the safety latch
    • Open the hood
    • Insert the prop rod
  2. step 2 :Adding Coolant
    • Locate the radiator fill cap
    • Twist to the right and pull up
    • Add coolant until completely full
  3. step 3 :Checking the Coolant Level
    • Locate the coolant reservoir
    • Check that the level is between the "Min" and "Max" lines
    • Add fluid as necessary
  4. step 4 :Closing the Hood
    • Remove the prop rod
    • Secure it in its resting clip
    • Close the hood and lock it in place

Tools needed for replacement

  • 1A - No Tools Needed

    No Tools Needed

Installation Video
Watch video

Hi, I’m Mike from 1A Auto. We’ve been selling auto parts for over 30 years!

We're gonna release the hood right by this foot rest. Grab the lever right there and pull it out. Now we're gonna pull open the hood. The release is right here. Just push that up. Release the hood and you can grab the prop rod right here. Pull it up and stick it right there.

Here's your coolant right here. This is where you add it to the radiator if you did any kind of repairs or had a major leak. You want to make sure that you do not take this cap off when the vehicle is hot.

To take the cap off, you're gonna twist it to the left. And then you pull out. That's where you add it. But on regular basis, you want to check it at the reservoir over here. As you can see, this level - this is the indicator for the minimum. And this is the indicator for the maximum right there. So, you're gonna want to check that right there. Sometimes it might be easier if you take a flashlight and you hold it up to the bottle, then you can see where the level is and you can adjust the level accordingly.

To open this, you're gonna twist this to the left to pull the cap off. Pull this hose out. Add your fluid. And once you're up to where you need to be then you can put the cap back on. Make sure that hose goes in, and just snug it up.

To close the hood we're gonna pull the prop rod out. Put it back in its holder and drop the hood.

Thanks for watching. Visit us at for quality auto parts, fast and free shipping, and the best customer service in the industry.

Tools needed for replacement:

    1A - No Tools Needed

  • No Tools Needed

The 8th Eighth Digit in the VIN Vehicle Identification Number Indicates Engine

The 8th Eighth Digit in the VIN Vehicle Identification Number Indicates Engine

Some vehicle specific parts may require you to check the 8th digit of your VIN to confirm the correct part. This video shows you how.

Search Videos
Go To Top

Same Day Shipping

Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos to guide you step-by-step through your repair.