1A Auto Video Library
Our how-to videos have helped repair over 100 million vehicles.

How to Change Map Light Bulbs 09-18 Ram 1500

Share on:

How to Change Map Light Bulbs 09-18 Ram 1500

Created on: 2018-06-21

How to replace a burnt out or dead dome light bulb on 16 Ram 1500

  1. step 1 :Removing the Map Light Bulb
    • Pry out the side of the map light lens
    • Slide out the map light lens
    • Pull the bulb out of the map light
  2. step 2 :Installing the Map Light Bulb
    • Push a 194 peanut bulb into the socket
    • Line up the map light lens with the tab on the outside of the vehicle
    • Press the lens into place

Tools needed for replacement

  • Specialty Tools

    Trim Tool Set

Installation Video
Watch video

Hi. I'm Mike from 1AAuto. We've been selling auto parts for over 30 years!

To remove these map lights, and change the bulb, they are hinged right here. Push them on and off. We use our plastic prying tool; you can get this from, and you want to pry up on this edge here. Two little hinges are here, so you can just kind of go to the outside edge. There's a tab up here, so you don't want to pry up here, you'll break the tab off. So just kind of gently pop it out, and then kind of work the tool around here, and then pop that out, and it will slide out. There's the tab. The covers off.

With the lens cover off, we can get to the bulb. It's a little 194 peanut bulb. It can be kind of hard to get to, and get your fingers in there, but you can try, and if you get a hold of it, and then just kind of wiggle it as you try to pull down, sometimes it'll come out with your fingers. It can be difficult though. You just have to work at it. So I was just basically, just pushing around, wiggling it, working it out of the socket.

This just pushes in. So to replace it, just reinstall it by pushing it right into the socket, the same way that it came out. This side is the same exact way.

To reinstall, we'll put the tab towards the outside of the vehicle. So on the passenger side, this tab will be towards the passenger side. Then slide it up in. It kind of finds a little opening right about there. Then push it up into the hinges. It'll snap into place. It's the same for the other side.

Thanks for watching. Visit us at for quality auto parts, fast and free shipping, and the best customer service in the industry.

Tools needed for replacement:

    Specialty Tools

  • Trim Tool Set

How To Fix Rear Defrost Grid Connector

How To Fix Rear Defrost Grid Connector

1A Auto shows you how to fix a rear defroster terminal connector tab.

Search Videos
Go To Top

Same Day Shipping

Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos to guide you step-by-step through your repair.