Menu

1A Auto Video Library
Our how-to videos have helped repair over 100 million vehicles.

How to Change Engine Oil 07-14 Nissan Rogue

Share on:

How to Change Engine Oil 07-14 Nissan Rogue

Created on: 2017-05-03

How to flush, replace and change the old oil on 07, 08, 09, 10, 11, 12, 13, 14 Nissan Rogue.

  1. step 1 :Draining the Oil
    • Raise the vehicle on jack stands
    • Have a drain pan ready
    • Remove the 14mm bolt from the drain
    • Drain the oil
    • Twist on the 14mm drain bolt
    • Tighten the bolt with a 15mm wrench or socket and ratchet
  2. step 2 :Removing the Oil Filter
    • Remove the clips from the inner wheel well liner
    • Remove the oil filter with an oil filter wrench
    • Clean the area with a rag
  3. step 3 :Installing the Oil Filter
    • Place a layer of oil around the rim of the oil filter
    • Twist the oil filter into place
    • Reinstall the inner wheel well
  4. step 4 :Servicing the Oil
    • Remove the oil cap
    • Place a funnel into the oil fill
    • Replace the oil to the recommended amount
    • Replace the oil cap
    • Start the vehicle
    • Let the engine run for a few seconds
    • Turn the vehicle off
    • Check the oil level with the dipstick

Tools needed for replacement

  • General Tools

    Funnel

    Drain Pan

  • Materials, Fluids, and Supplies

    Cloth Rags

  • Pliers, Cutters & misc Wrenches

    Oil Filter Wrench

  • Ratchets & Related

    Ratchet

  • Sockets - Metric

    14mm Socket

Installation Video
Watch video

Hi, I'm Mike from 1AAuto. We've been selling auto parts for over 30 years! We're dedicated to delivering quality auto parts, expert customer service, and fast and free shipping, all backed by our 100% satisfaction guarantee. So visit us at 1AAuto.com, your trusted source for quality auto parts.

In this video, we're going to be working with our 2009 Nissan Rogue. We're going to show you how to drain and fill your vehicle's oil, as well as how to remove and replace your engine oil filter.

If you like this video, please click Subscribe. We have a ton more information on this and many other vehicles. And if you need parts for your car, you can follow the link down in the description over to 1AAuto.com.

Here are the items you'll need for this procedure: 14mm socket, ratchet, drain pan, rags, oil filter wrench, oil, funnel

Remove your oil cap. Remove the 14mm oil pan drain plug with a socket and ratchet. Make sure you have a drain bucket under the pan before removing the plug, and place the plug somewhere clean and dry while you wait for your oil to drain. Reinstall the drain plug when the oil is finished draining, and tighten it back down with your 14mm socket and ratchet. Be sure to wipe up any excess oil spills.

And then your oil filter is actually located behind this little plastic cover. All of our clips are missing, so you may need to remove them, or you may just be able to pry it out of the way. You may need to use a strap wrench or filter wrench to help get this loose. And it does tend to leak onto the sub frame a little bit, so make sure you have a little extra room on your drain bucket. I'm just going to leave it loose and allow the oil to finish draining. Finish removing your oil filter, and always check to make sure that the old gasket is on there and not stuck to the engine.

If you double up on the gaskets it's not going to seal. Put some new oil on the tip of your finger and lubricate the gasket with it, then reinstall the filter onto its spindle. There's no need to use a tool when reinstalling these, just get them as tight as you can by hand. Wipe up any oil that made its way onto the sub frame.

Reinstall the pins to the inner wheel well if yours are still there. Fill the engine with 4-7/8 quarts of your favorite oil. Reinstall your oil cap, and run the vehicle for a few seconds to allow oil pressure to cycle through the motor. Shut it off and check your oil level. Correct as necessary.

Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.

Tools needed for replacement:

    General Tools

  • Funnel
  • Drain Pan

  • Materials, Fluids, and Supplies

  • Cloth Rags

  • Pliers, Cutters & misc Wrenches

  • Oil Filter Wrench

  • Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 14mm Socket

2005 - 2014  Nissan  Armada
1980 - 2014  Nissan  Maxima
2003 - 2007  Nissan  Murano
1993 - 2009  Nissan  Quest
2004 - 2014  Nissan  Titan
2000 - 2014  Nissan  Xterra
2003 - 2009  Nissan  350Z
2013 - 2013  Infiniti  JX35
2008 - 2012  Infiniti  EX35
2004 - 2012  Infiniti  FX35
2011 - 2012  Infiniti  G25
2008 - 2012  Infiniti  G37
2012 - 2012  Infiniti  M35h
2011 - 2012  Infiniti  M37
2006 - 2010  Infiniti  M35
2002 - 2004  Infiniti  I35
1996 - 2001  Infiniti  I30
2003 - 2008  Infiniti  G35
2007 - 2016  Nissan  Rogue
2011 - 2017  Nissan  Quest
1993 - 2016  Nissan  Sentra
2004 - 2017  Nissan  Versa
2009 - 2016  Nissan  Murano
1993 - 2016  Nissan  Pathfinder
1993 - 2017  Nissan  Altima
2009 - 2016  Nissan  370Z
2011 - 2017  Nissan  Juke
2016 - 2017  Nissan  Maxima
2009 - 2014  Nissan  370Z
1993 - 2014  Nissan  Altima
2011 - 2014  Nissan  Juke
2009 - 2014  Nissan  Murano
1993 - 2014  Nissan  Pathfinder
2011 - 2014  Nissan  Quest
2007 - 2014  Nissan  Rogue
1993 - 2014  Nissan  Sentra
2004 - 2014  Nissan  Versa
2014 - 2015  Nissan  Versa Note
Search Videos
Go To Top

Same Day Shipping

Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos to guide you step-by-step through your repair.

Loading...