1A Auto Video Library
Our how-to videos have helped repair over 100 million vehicles.
Enter Vehicle Year Make Model

Specify your vehicle's year, make and model to guarantee fit.

How To Replace Power Window Switch 2003-08 Honda Pilot

Created on: 2015-07-29

How to repair, install, fix, change or replace a damaged, worn out, faulty or shorted power window switch on 03, 04, 05, 06, 07, 08 Honda Pilot

  1. step 1 :Removing the Window Switch
    • Pry up the switch panel with a flat blade screwdriver
    • Disconnect the window switch wiring harness
    • Remove the three Phillips screws from the switch
    • Remove the window switch
  2. step 2 :Installing the Window Switch
    • Insert the window switch
    • Tighten the three Phillips screws to the window switch
    • Connect the window switch wiring harness
    • Press the window switch into place

Tools needed

  • Flat Blade Screwdriver

    Phillips Head Screwdriver

Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.

Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.

In this video, we're going to show you how to replace one of the single power window switches. This is pretty much the same for the passenger front door as well as the two rear doors. You'll just need a flat blade screwdriver and a Phillips screwdriver.

Start with your flat blade screwdriver and pry up on the panel that you want to replace the switch in. Down the back side, there's a tab that holds the harness into the switch. Press that tab and disconnect the switch, and then three Phillips screws hold the switch to the trim panel. I'll fast-forward here as I remove those three. Then the switch comes off.

The switch in our vehicle is fine, so we're just doing this to show you, but you reinstall the switch, put your new switch in, start the three screws in, and then I'll fast-forward again as I tighten those up. Be sure not to over tighten them; you want to get them nice and firm but don't over tighten them. You don't want to strip out the plastic. Then reconnect the harness, put the front of the panel in first, and then snap the back down in.

Thanks for tuning in. We hope this video helped you out. Next time you need parts for your car, please visit 1AAuto.com. Also check out our other helpful how-to and diagnosis videos.


How to Replace Power Window Switch 2000-05 Chevy Monte Carlo

How to repair, install, fix, change or replace a damaged, worn out, faulty or shorted power window switch on 00, 01, 02, 03, 04, 05, Chevy Monte Carlo.

Share on:
Go To Top

Same Day Shipping

Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos to guide you step-by-step through your repair.