Power Windows Mirrors Locks Not Working - Replace Main Accessory Power Fuse 2002-06 GMC Envoy
Created on: 2014-08-30
If your power windows, doors, or mirrors aren't working in your 02-06 GMC Envoy, 1A Auto shows you how to replace the main accessory power fuse.
-
step 1 :Removing the Accessory Fuse
- Lift up the fuse box cover
- Disconnect the negative battery cable
- Remove the 7mm bolt from the fuse
- Remove the 13mm nut from the fuse
- Pull the wires off the fuse
- Pry the fuse out with a flat blade screwdriver
-
step 2 :Installing the Accessory Fuse
- Slide the fuse onto the studs
- Put the wires onto the fuse
- Insert the 7mm bolt into the fuse
- Fasten the 13mm nut onto the fuse stud
- Clip on the fuse box cover
- Connect the negative battery cable
- Test the windows and other accessories
Tools needed
-
13mm Socket
Flat Blade Screwdriver
8mm Socket
7mm Socket
Ratchet
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the accessory fuse on this 2003 GMC Envoy XL. It's located in your fuse panel. The tools you'll need for it are a 7mm, 8mm, and 13mm socket and ratchet. In your vehicle manual you'll see it listed as the instrument panel battery.
In our vehicle, turn the key on, and everything lights up, but none of our accessories are working. Power windows, mirror, seat heaters, none of this is working. Even our A/C and radio are not working. If you have this issue, most likely, if you come under here, there's two tabs on each end of this box right behind the battery. Lift this up. This fuse here is a 125 amp fuse for all the accessories.
Unhook the negative battery cable first, and there's a 7mm on this side and a 13mm on this side. Now you can pull the fuse out. You do have to push on these little tabs. Put your finger or a screw driver underneath here.
Push the fuse back down onto the studs, and then you can place the wires and tighten up this bolt. Then, replace the other wire, replace the nut, and tighten that up. Close your fuse panel. Replace your negative battery cable and tighten it up. As you can see, our windows work now. Everything works, so you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Upgrade Foggy Cloudy Dull Hazy Headlights on Your Car or Truck with Performance Light Kits
Andy puts some sleek new performance headlights on a Ford F-150 hanging around our studio, and the transformation is magnificent!
