Snow, ice, dirt, and dust can interfere or damage your windshield wipers and the motion transmission mechanism. A bent or damaged link can cause the wipers to not work or work incompletely. These parts will also cause an annoying squeaking when they wear out. In general replacing windshield wiper transmission parts is not difficult. This may vary on some applications. It requires basic tools and removal and installation of small body parts such as cowl vent grilles. This replacement wiper transmission connecting rod may be just what you need to get your windshield wiper system working properly again.

Specifications:

  • Comes as a PAIR
    • Fits LH (Driver Side) and RH (Passenger Side)
  • Replaces dealer part numbers: 12463067, 15043370, 15783973
  • Fits between windshield wiper motor and the wiper arm
  • Direct bolt on
  • Built to strict quality control standards
  • Stamped construction
  • Includes knurl where wiper arm attaches

This wiper transmission connecting rod makes a great replacement and allows you to get your windshield wiper system working correctly again.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Hood Cowl (0:38)
    • Pry off the wiper arm clip with a flat blade screwdriver
    • Pull off the wiper arms
    • Remove the two Phillips head screws from the hood cowl corner panels
    • Pull off the corner panels
    • Remove the two Phillips screws from the cowl
    • Pull off the hood weatherstrip
    • Remove the six Phillips screws behind the weatherstrip from the cowl
    • Pull off the washer hose
    • Pull off the cowl
  2. step : Removing the Wiper Transmission Linkages (2:25)
    • Loosen the two 10mm nuts on the driver side wiper linkage
    • Push the driver side linkage off its stud
    • Remove the three 11mm bolts from the driver side linkage
    • Pull off the driver side linkage
    • Loosen the two 10mm nuts on the passenger side wiper linkage
    • Push the passenger side linkage off its stud
    • Remove the three 11mm bolts from the passenger side linkage
    • Pull off the passenger side linkage
  3. step : Installing the New Wiper Linkages (3:38)
    • Loosen the outside 10mm nut on the driver side linkage
    • Remove the inside 10mm nut on the driver side linkage
    • Feed the linkage into place
    • Push the linkage onto the wiper motor stud
    • Fasten the two 10mm nuts onto the linkage
    • Push the linkage post into place
    • Insert the three 11mm bolts into the linkage
    • Loosen the two 10mm nuts on the passenger side linkage
    • Feed the linkage into place
    • Push the linkage onto the wiper motor stud
    • Push the linkage post into place
    • Insert the three 11mm bolts into the linkage
    • Fasten the two 10mm nuts onto the linkage
  4. step : Reinstalling the Hood Cowl (6:04)
    • Push the cowl into place
    • Connect the windshield washer hose to the cowl
    • Insert the two Phillips screws into the cowl
    • Insert the six Phillips screws along the cowl edge
    • Push on the two corner panels
    • Insert the two Phillips screws into the corner panels
    • Push on the weatherstrip
    • Push the wiper arms into place
    • Push in the wiper arm clips

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 11mm Socket

2.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
0
0
1
0
1
Wiper arm assembly ok
I ordered this set of replacement wiper arms for our 1999 Chevy Tahoe. The install went fine with the exception that the manufacturer allowed solder to flow into the splines of the post, which I had to carefully grind off. Otherwise a good buy, and good delivery.
December 26, 2017
Purchased
3 months ago
Horrible Fit
Not even close on the fit of the stud (your part) to the wiper arm (original GM factory arm). I used grease on the wiper arm and still had to hammer the arm in place. Now the passenger side stud assembly is loose even though the 3 bolts are secure.

If I have to service the passenger arm in the future, I will have to sawzall the dam thing off.

What a waste of money.
December 24, 2016
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(07:54 min)

Tools List:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 11mm Socket




Vehicle Fit

  • 1999-2000 Cadillac Escalade Windshield Wiper Transmission Arm Pair
  • 1992-1994 Chevy Blazer Full Size Windshield Wiper Transmission Arm Pair
  • 1988-1998 Chevy C1500 Truck Windshield Wiper Transmission Arm Pair
  • 1988-2000 Chevy C2500 Truck Windshield Wiper Transmission Arm Pair
  • 1988-2002 Chevy C3500 Truck Windshield Wiper Transmission Arm Pair
  • 1988-1998 Chevy K1500 Truck Windshield Wiper Transmission Arm Pair
  • 1988-2000 Chevy K2500 Truck Windshield Wiper Transmission Arm Pair
  • 1988-2000 Chevy K3500 Truck Windshield Wiper Transmission Arm Pair
  • 1992-1999 Chevy Suburban C1500 Windshield Wiper Transmission Arm Pair
  • 1992-1999 Chevy Suburban C2500 Windshield Wiper Transmission Arm Pair
  • 1992-1999 Chevy Suburban K1500 Windshield Wiper Transmission Arm Pair
  • 1992-1999 Chevy Suburban K2500 Windshield Wiper Transmission Arm Pair
  • 1995-1999 Chevy Tahoe Windshield Wiper Transmission Arm Pair
  • 2000 Chevy Tahoe Pair Models V8 5.7L Windshield Wiper Transmission Arm
  • 1988-1998 GMC C1500 Truck Windshield Wiper Transmission Arm Pair
  • 1988-2000 GMC C2500 Truck Windshield Wiper Transmission Arm Pair
  • 1988-2002 GMC C3500 Truck Windshield Wiper Transmission Arm Pair
  • 1988-1998 GMC K1500 Truck Windshield Wiper Transmission Arm Pair
  • 1988-2000 GMC K2500 Truck Windshield Wiper Transmission Arm Pair
  • 1988-2000 GMC K3500 Truck Windshield Wiper Transmission Arm Pair
  • 1992-1999 GMC Suburban C1500 Windshield Wiper Transmission Arm Pair
  • 1992-1999 GMC Suburban C2500 Windshield Wiper Transmission Arm Pair
  • 1992-1999 GMC Suburban K1500 Windshield Wiper Transmission Arm Pair
  • 1992-1999 GMC Suburban K2500 Windshield Wiper Transmission Arm Pair
  • 1992-1999 GMC Yukon Windshield Wiper Transmission Arm Pair
  • 2000 GMC Yukon Pair Models V8 5.7L Windshield Wiper Transmission Arm
Part #: 1AWWS00049

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More