This Windshield Wiper Switch with Delay Function is a new, aftermarket replacement part. It is designed to REPLACE original units that are prone for failure. It's just what you need to get your vehicle in good working order again!


  • Controls the following functions:
    • Windshield Wiper with Delay Function
    • Windshield Washer
  • Black finish on handle
  • Replaces dealer part numbers: 35256-S84-A01, 35256S84-A01
  • Exact replacement
  • Design improved for more durability
  • Detailed graphics
  • Built to strict quality control standards
  • 7 Terminal Connection

This Windshield Wiper Switch makes great replacement and has good cost savings over a dealer unit.


Our electrical and electronic parts are subject to strict quality control testing.  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed


Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Disconnect the battery (0:47)
    • Use an 8 mm wrench to disconnect the negative battery terminal
  2. step : Remove the steering column trim (1:00)
    • There are three Phillips screws to remove.
  3. step : Remove the wiper switch (1:56)
    • Pry apart the two steering column trim pieces.
    • Turn the wheel to access the two Phillips screws at the base of the wiper switch.
    • Pry out the wiper switch by using a flat blade screwdriver to depress the tab.
    • Unplug the wiring harness.
  4. step : install the new wiper switch (2:42)
    • Plug in the wiring harness and clip the switch down into the steering column.
    • Secure with the two Phillips screws.
  5. step : Re-install the steering column trim (3:28)
    • Clip the two steering column trim pieces back on
    • secure with the three Phillips screws.
    • Reconnect the negative battery terminal with your 8 mm wrench.

Tools needed for replacement:

    Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Wrenches - Metric

  • 8mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2001-2003 Acura CL Windshield Wiper Switch
  • 1999 Acura TL Windshield Wiper Switch
  • 1995-2002 Honda Accord Windshield Wiper Switch for Models with Delay Wipers

This part replaces:

  • Standard Motor Products DS-1054
Only 2 left in stock
Part #: 1AZMX00044

How-to Video:

(04:41 min)