Replaces
This part doesn’t fit a . Select from parts that fit.
1A Auto 1 Year Warranty
Genuine original equipment part (OEM) that was factory installed on your vehicle by the manufacturer.
Install Tip: Keep & reuse your original hardware, new hardware is not included with this item.
Item Condition:
New
1 Year Warranty
This item is backed by our 1-year warranty. In the event this item should fail during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks!
In this video, we're going to show you how to replace the cowl panels on this 2005 Ford F150. We'll show you how to replace both the passenger side and driver side cowl panels. The items you'll need for this are new cowl panels or panel from 1AAuto.com, a 7mm socket and ratchet and a flat blade screwdriver.
Put your wiper arm up, and then pry out this tab on the side of the wiper arm. Then lift the wiper arm off the stud. There should be a clip right here in your cowl panel that you just have to pry out, and there's another one on the other side. Then just pull your weather strip off.
There's a series of tabs on this driver's side panel. You want to just push each of them in and pull up. You do have to start with the driver's side panel, even if you only want to replace the passenger side. Then pull the panel forward, that will release the back hooks. Lift it up and work it on its side here. Then just pull that hose free and the driver's side panel is free.
Now to remove the passenger one, you have to remove this 7mm bolt, and we'll fast-forward as Mike does that. Now push the tabs on this panel and just work it up. We pull it free from the side and then just disconnect this hose right here, and the passenger side panel is free.
Take your passenger side panel and line up these hooks with these series of slots. Just feed it down into place. Once you get those hooks in place, you can start pushing down those tabs until they re-clip. Then reconnect this hose, replace that 7mm bolt, and tighten it up.
Now lower the driver's side panel into place. Reconnect that hose, then re-hook the panel in. Line up those front tabs and push them back down into place. Now push your weather strip back into place.
Take your wiper arms, straighten them back out, and then just push them back onto those studs. You should hear them click back into place. Now repeat the process with the passenger side wiper arm, and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
