Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Our aftermarket reservoirs are some of the highest quality replacements on the market! This Windshield Washer Reservoir is a complete, ready to bolt on, direct replacement part.

Specifications:

  • Brand new in the box
  • High quality item that is built to strict quality control standards
  • Replaces dealer part numbers: 12487671, 25713160, 5075118
  • Direct replacement
  • No Low Fluid Sensor
  • Correct for models with a rear wiper option only

Now you can buy a high quality reservoir that is built to strict quality control standards. This makes a great replacement and has great cost savings over a factory assembly.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Battery (0:38)
    • Disconnect the 10mm bolt from the brace
    • Disconnect the negative battery cable with an 8mm wrench
    • Disconnect the positive battery cable with an 8mm wrench
    • Remove the 13mm battery mounting bolt
    • Remove the battery mount
    • Remove the 10mm bolts that connect the battery tray to the radiator support
    • Pull out the battery tray
  2. step : Removing the Washer Bottle (2:12)
    • Remove the clips from the inner fender with a flat blade screwdriver and pliers
    • Lift up on the tab and pull the inner fender free
    • Pull the hoses free from the washer bottle
    • Remove the 10mm bolts
    • Place a drip pan beneath the washer bottle
    • Disconnect the washer pumps and level sensor
    • Push the bottle down and out
  3. step : Preparing the New Washer Bottle (4:44)
    • Place the washer bottle on its side and pull the sensor up and out
    • Pry off the gasket
    • Push the level sensor into the new washer bottle
  4. step : Installing the Washer Bottle (5:15)
    • Push the washer pumps down into the washer bottle until they snap
    • Reconnect the level sensor harness
    • Replace the hoses on the side
    • Replace and tighten both 10mm bolts
    • Lift the inner fender into place and replace the clips
  5. step : Reattaching the Battery (6:54)
    • Put the battery tray into place, front first
    • Then slide the rear bolt hole over the bolt
    • Insert the two bolts into the radiator support
    • Put the battery on the tray
    • Put the battery mount in place
    • Tighten the 13mm battery mounting bolt
    • Reconnect the positive battery cable
    • Reconnect the negative battery cable

Tools needed for replacement:

    Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 13mm Socket

  • Wrenches - Metric

  • 8mm Wrench

5.00/ 5.0
4 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
4
0
0
0
0
As always the part that I ordered was exactly what I wanted and it fit perfectly I would recommend this company to anyone Write your review here. It must be at least 50 characters long. Consider whether you would recommend this product and what you like or dislike about it.
May 6, 2018
OEM Fit
An easy swap, assuming your battery tray isnt rusted out like mine was.
October 25, 2018
Perfect Fit
No issues at all, fit perfect. Replacement video was a perfect aid to make the replacement easy.
November 11, 2018
Part is an exact fit no problems what so ever thank you so much a One Auto
November 21, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Do you have military discounts?
C J July 13, 2017
We do not offer military discounts at this time, but thank you for your service.
Alex P July 14, 2017
Will this fit a 2003 Silverado?
Sean E October 15, 2017
No this part will not fit a 2003 Chevy Silverado.
Tim K October 16, 2017
Year Make Model Description
2000Cadillac Escalade Cadillac Escalade Windshield Washer Reservoir for Models with Rear Wiper & Washer
2002-2006Cadillac Escalade Cadillac Escalade Windshield Washer Reservoir for Models with Rear Wiper & Washer
2003-2006Cadillac Escalade ESV Cadillac Escalade ESV Windshield Washer Reservoir for Models with Rear Wiper & Washer
2000-2006Chevy Suburban 1500 Chevy Suburban 1500 Windshield Washer Reservoir for Models with Rear Wiper & Washer
2000-2006Chevy Suburban 2500 Chevy Suburban 2500 Windshield Washer Reservoir for Models with Rear Wiper & Washer
2000-2006Chevy Tahoe Chevy Tahoe Windshield Washer Reservoir for Models with Rear Wiper & Washer
2000-2006GMC Yukon GMC Yukon Windshield Washer Reservoir for Models with Rear Wiper & Washer
2000-2006GMC Yukon XL 1500 GMC Yukon XL 1500 Windshield Washer Reservoir for Models with Rear Wiper & Washer
2000-2006GMC Yukon XL 2500 GMC Yukon XL 2500 Windshield Washer Reservoir for Models with Rear Wiper & Washer
Part #: 1AWWR00004


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(08:41 min)