Replaces

Windshield Washer Reservoir (with Washer Pump) - 1AWWR00158

Our windshield washer reservoirs are some of the highest quality replacements on the market!

Specifications:

  • Brand New Windshield Washer Reservoir
  • Includes Cap and Washer Pump
  • Direct replacement
  • Built to strict quality control standards

Now you can buy a high quality windshield washer reservoir that is built to strict quality control standards. Replace your broken or cracked one now with this great fitting washer tank.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Air Dam (1:01)
    • Raise and support the vehicle on jack stands
    • Remove the three plastic pins on both sides of the dam
    • Remove the bolts along the bottom of the bumper
    • Remove the air dam
  2. step : Removing the Washer Fluid Sensor and Pump (1:32)
    • Place a funnel and drain pan beneath the pump
    • Loosen the washer pump hose and let the fluid drain
    • Disconnect the washer fluid level sensor
    • Pry and rotate the sensor and gasket out of the bottle
    • Disconnect the sensor
    • Pry and rotate the pump out of the bottle
  3. step : Removing the Washer Fluid Bottle (2:10)
    • Remove the three 10mm bolts from the washer bottle
    • Pull back and lower the reservoir out of the vehicle
  4. step : Installing the Washer Fluid Bottle (3:41)
    • Insert the washer bottle up into place
    • Tighten the 10mm bolts to the washer bottle
  5. step : Installing the Washer Fluid Sensor and Pump (4:28)
    • Insert the sensor and gasket into place
    • Insert the pump and gasket into place
    • Connect the sensors
    • Reconnect the washer hose
    • Refill the washer fluid to the fill line
  6. step : Installing the Air Dam (5:26)
    • Insert the air dam into place
    • Tighten the bolts along the bottom of the bumper
    • Press the six pins into the dam

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Drain Pan
  • Floor Jack
  • Funnel

  • Materials, Fluids, and Supplies

  • Gloves
  • Windshield Washer Fluid

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(06:07 min)

Tools List:

    General Tools

  • Jack Stands
  • Drain Pan
  • Floor Jack
  • Funnel

  • Materials, Fluids, and Supplies

  • Gloves
  • Windshield Washer Fluid

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket



This part replaces:

  • OE # 4805737AA
  • OE # 5139113AA
  • OE # 5170706A
  • Dorman 603-296

Vehicle Fit

  • 2006-2010 Chrysler 300 Windshield Washer Reservoir (with Washer Pump) for Models without Headlight Washers
  • 2008-2010 Dodge Challenger Windshield Washer Reservoir (with Washer Pump)
  • 2006-2010 Dodge Charger Windshield Washer Reservoir (with Washer Pump)
  • 2005-2008 Dodge Magnum Windshield Washer Reservoir (with Washer Pump) for Models without Headlight Washers
Only 2 left in stock
Part #: 1AWWR00158

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More