Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Regulator Option:   with Motor
  • Operation:   Power

Specifications:

  • LH (Driver Side) Front
  • Power operation
  • Includes the power window motor
  • Direct bolt on replacement
  • Built to strict quality control standards

Please Note:

This window regulator is a high quality aftermarket part that meets or exceeds the performance of the original. It has been subjected to extensive testing and quality control standards. That is why we offer this regulator with our superior warranty!

Direct Fit

Direct fit, pre-assembled parts made ready to fit your vehicle and provide easy and trouble-free installation.

Rigorously Tested

Build to strict quality standards

Highest Quality Materials

Made from the highest quality materials for extreme durability and premium performance.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove the Door Panel (0:48)
    • Using a flat blade screwdriver pry up the switch panel
    • Pry of the mirror switch
    • Disconnect all the wire harnesses from the switch panel
    • Remove the caps from the pull handle to uncover the screws
    • Using the area at the top of the door handle panel pry the panel off
    • Remove the five Phillips screws on the door panel
    • Lift the door panel up and out
    • Disconnect the wiring harnesses to get the panel free
  2. step : Accessing the Window Regulators (4:06)
    • Remove the three screws on the speaker and pull it free. Disconnect the wire harness on the back
    • Remove the junction block below this, by removing the screw
    • Carefully pull the door handle down and out of the way
  3. step : Removing the Window Regulator (4:38)
    • Place a punch on the center of the rivets and use a hammer to punch the center out
    • Move your window up
    • Remove the inside door handle. Disconnect it from the door rod
    • Knock the center of the rivets out on the actual regulator
    • Use a 3/8 drill bit to drill out each of the rivets. Do this slowly and carefully
    • Disconnect the wiring harness linked to the window motor
    • Remove the weather strip at the bottom of the window
    • Remove the window rivets
    • Let the window down
    • Tilt the nose down and pull up to free the window from the door
    • Remove the two 11mm bolts at the top of the door
    • Pull the window regulator out of the door
  4. step : Replacing the Window Regulator (9:48)
    • Fit the regulator into the door
    • Hang the regulator into place using the top studs. Put the nuts on to secure them
    • With hardware s bought bolts washer and nuts, secure the regulator to replace the rivets
    • Connect the regulator wiring harness
    • Tighten the regulator bolts and nuts
    • Make sure the window is clear of the old rivets. Use pliers and screwdrivers to pry the remnants free
    • Put the window in nose first and tilt the back down in
    • Slide the window into the rail
    • Put bolts into the holes to secure the window to the regulator
    • Plug in the window switch panel
    • Test the window before reapplying the door panel
  5. step : Reapplying the Door Panel (15:10)
    • Reinsert the weather strip
    • Put the inner door handle back into place and replace the screw
    • Disconnect the window switch panel
    • Reposition the water shield
    • Screw the speaker back into place
    • Screw the junction block back into place
    • Reconnect the harnesses to the back of the door panel
    • Pull the door panel up and of the lock and snap down into place
    • Reinsert the five Phillips screws
    • Reconnect the switch panel and snap it into place
    • Put the interior door handle panel back into place
    • Put the pull handle caps back into place

Tools needed for replacement:

    Drills, Drill Bits & Related

  • Drill
  • 3/8 Inch Drill Bit

  • General Tools

  • Center Punch
  • Hammer

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 11mm Socket

4.73/ 5.0
22 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
17
4
1
0
0
good quality
The regulator was easy to install and has worked great so far.very quite and smooth action. I would definitely buy this regulator again if I needed one
February 9, 2017
Perfect fit, great how to video
I am not a mechanic, but I know how to follow directions. The video on Youtube gave me perfect step by step directions on how to remove and replace the regulator. After pricing the regulator locally I decided top give 1A my business. The price was right and I received within two or three days. Perfect fit! Thanks for the video and the product. The window now goes up and down. Thanks.
June 17, 2017
window regulator
Video was really helpful. My granddaughter and I did the job in 2 hours.
June 30, 2017
Quick & easy
Im glad to have this job done the new regulator works great using the website was easy as well
July 24, 2017
Good product great price great how to video
Great how to video to install regulator. Price was way below my local car parts stores. Received the part in two days! So far couldnt be happier with purchase! Will buy from again
July 25, 2017
fits, works and less then half the cost of the oem part
This reg and motor combo seems very well made, they fit my moms Merc perfectly and at less then half the cost of the OEM parts.... Ill definitely be coming back to A1 for my other part needs. Thanks a bunch guys.
July 28, 2017
94 Merc drivers window regulator replacement
The product worked just fine (once I got it installed). WATCH the VIDEO before you start this replacement. Then watch it while you do the replacement. There are differences among the car models and years. My Grand Marquis had additional connections to the door inside panel. it had a trunk unlock cabel and a switch to open the fule door. Hint--- I had a big suction cup I used to help remove and replace the window. It worked great. It took me several (4) hours, but I saved about $300 over having my local mechanic do the job.
July 29, 2017
good product
works like it is supposed to. NOT JUNK. Came when supposed to with good instructions.
August 23, 2017
2006 grand marquis window regulator
I’m am totally happy with the quality and price of the regulator that I bought from you. Your delivery was excellent and I’m impressed with your followup concerning my purchase. I will buy from your company again whenever I’m in need of auto parts. I rate your videos excellent also. Thanks.
October 16, 2017
Perfect
This part fit like the original and was easy to install by following the installation video. Every hole and bolt lined up perfectly.
January 26, 2018
Window Regulator, Perfict fit
I purchased this window regulator for my 1997 Mercury Marquis. I watched the video that 1A Auto had for this particular part. All I can say is the part fit perfectly and the video was awesome. Will definitely purchase from 1A auto in the future.....
February 5, 2018
2009 window actuator
So far so good. They sent all the bolts and nuts for the window, but I wish they included 3 more for the door handle.
April 1, 2018
1AWRG00254-Window Regulator and motor
Great Product, easier to install with the instruction of 1A Auto.
April 10, 2018
Made my life easier.
I was pleasantly surprised it fit so perfectly. Installation went easily, without any problems at all. And it had two wires that might be either, for my vehicle, so I didnt have to go looking for the correct wire, just match the one to my car.
April 27, 2018
Quality, Fits, and Has Bolts
The window regulator for my FORD looked to be of good quality, and exactly fit my door. The accompanying video was a great help, and do note the kit comes with bolts and nuts which apparently werent available when the video was made.
May 4, 2018
Window Regulator
Exact replacement and easy to install. Great customer service from 1A Auto. I have had to return a part in the past, no questions ask with immediate replacement. Buy with confidence.
August 2, 2018
replace bad window regulator
Received on time (as expected) and viewed your on-line display of the replacement. Worked good except for the actual rivet replacement (which need to be replaced with proper sized nuts and bolts) and the moving of the glass (which not use to doing) but other than that it was fine.
August 16, 2018
fast shipping, great price, fit was perfect> installation was easy works as it should. what more could you ask for? A1 will be my go to guy from now on. jim
September 15, 2018
window regulator
yes it was affordable direct fit easy to install, plus the hard ware was a big help too , step by step instructions video , yes i will consider 1Aauto for all my projects , i would recommend to friends. Its a great product and saved me a lot on money THATs what i liked . One thing 1 of the replacement bolt when installing the new motor , i had to compromise , the new motor the plate for that motor is Flat , where as the original motor plate is raised platform easy to install all 3 bolts, but the new flat plate on the new motor regulator , one of the hole for mounting , doesnt allow space for that 3rd bolt , or it will bind up against the Motor
September 26, 2018
Replaced this twice
I replace this 17 months ago and hoped I wouldnt have to do it again, but the part failed. I bought the first one from 1A as well as the second one, basically because I appreciate the installation video. The second part looked like it was made by a different manufacture from the first so Im hopefully this one will last. I only gave it 3 stars because it was supposed to have a lifetime warrant (although I did not try to collect on it). Otherwise it works fine and the cost is reasonable.
September 26, 2018
Impressed.
J just as described and seems to be quality made works better than the factory one did
October 1, 2018
Good Product Easy Install
Good Window Regulator. Easy install with 1A video. It was short a couple of nuts for the install. Since you have to drill out the rivets and replace them with nuts and bolts.
October 5, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Does this power window regulator come with screws? or I have to source them by myself?
Hsu N June 1, 2018
As I recall you had to get your own nuts and bolts, but directions tell you what size. I am not a mechanic, but I can follow directions. Easy to remove and install. I watched their video and it worked
M I June 1, 2018
Not including the screws
Kai Yu H June 1, 2018
Mine came with the screws needed all I had to buy was some loctite.
M S August 21, 2018
Mine came with the required bolts and nuts.
Tom J September 26, 2018
Mine came complete with the correct size nuts and bolts.
Tom J November 8, 2018
What size nut and bolts replace the rivets?
Keith B September 4, 2018
Thank you for your question. It all depends on what size bit you use to drill them out, but we do not have exact specs for the nuts and bolts you will have to get.
Tim K September 4, 2018
Year Make Model Description
1992-2011Ford Crown Victoria Ford Crown Victoria Front Power Window Regulator with Motor Driver Side
1992-2010Mercury Grand Marquis Mercury Grand Marquis Front Power Window Regulator with Motor Driver Side
2003-2004Mercury Marauder Mercury Marauder Front Power Window Regulator with Motor Driver Side
Part #: 1AWRG00254


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(18:52 min)