Window Regulator - 1AWRG00253

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

Part Details

  • Regulator Option:   with Motor
  • Operation:   Power


  • RH (Passenger Side) Rear
  • Power operation
  • Includes the power window motor
  • Direct replacement
  • Built to strict quality control standards

Please Note:

This window regulator is a high quality aftermarket part that meets or exceeds the performance of the original. It has been subjected to extensive testing and quality control standards. That is why we offer this regulator with our superior warranty!

Direct Fit

Direct fit, pre-assembled parts made ready to fit your vehicle and provide easy and trouble-free installation.

Rigorously Tested

Build to strict quality standards

Highest Quality Materials

Made from the highest quality materials for extreme durability and premium performance.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Door Panel (1:03)
    • Pry up the switch panel with a flat blade screwdriver
    • Remove the Phillips head screws from the window switch harness
    • Pry out on the switch with a flat blade screwdriver
    • Pry off the bezel with a flat blade screwdriver
    • Pry off the two trim covers on the pull handle
    • Remove the two Phillips screws from the pull handle
    • Remove the Phillips screw from behind the switch panel
    • Remove the Phillips screw on the bottom of the door panel
    • Lift the panel up and off
    • Carefully pull off the water shield
  2. step : Removing the Rear Inside Door Handle (3:07)
    • Remove the Phillips screw from the door handle
    • Slide the handle forward and pull it out
    • Remove the door handle rod from the inside door handle
  3. step : Removing the Window Regulator (3:32)
    • Punch out the center of the rivets on the window motor with a hammer and punch
    • Punch out the rivets on the regulator
    • Punch out the rivets on the window
    • Drill out the rivets with a 3/8 bit
    • Remove the two 11mm bolts from the bottom of the regulator
    • Lower the window
    • Pull off the weatherstrip and trim around the window frame
    • Lift the secondary window up and out
    • Push the secondary window down and its weather strip down from the window frame
    • Raise the window by hand
    • Remove the window
    • Remove the two 11mm nuts on the top of the door
    • Disconnect the window motor lead
    • Pull the window regulator out through the door
  4. step : Reinstalling the Regulator (11:25)
    • Insert one of the bolts into the window regulator
    • Push the regulator into the door
    • Hang the regulator by the 11mm bolts in the regulator rail
    • Insert the two bolts into the window track
    • Insert the three bolts to the motor
    • Pry off the old rivets from the window with a flat blade screwdriver
    • Lower the window onto the regulator
    • Insert the two bolts into the bottom of the regulator
    • Lower the secondary window into place
    • Lift the window into place
    • Insert the two bolts that hold the window to the regulator
    • Put the weatherstrip and trim into place
  5. step : Installing the Rear Inside Door Handle (17:08)
    • Insert the door handle rod to the inside door handle
    • Slide the door handle back
    • Tighten the Phillips screw to the door handle
  6. step : Reinstalling the Door Panel (17:23)
    • Put the water shield in place
    • Lift the door panel into place
    • Insert the longer Phillips screw behind the switch panel
    • Insert the longer Phillips screw to the bottom of the door panel
    • Insert the two Phillips screws to the pull handle
    • Push the switch into the switch panel
    • Push the switch panel in place
    • Push in the door handle bezel
    • Push in the trim buttons on the pull handle

Tools needed for replacement:

    Drills, Drill Bits & Related

  • 3/8 Inch Drill Bit
  • Drill

  • Materials, Fluids, and Supplies

  • Coarse Threaded Bolts (to replace rivets)

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 11mm Socket

4.89/ 5.0
9 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Window regulator
I was very satisfied and will order from this company again
March 17, 2017
window regulator replacement
The window regulator that I ordered was a perfect match and came with the installation hardware. The installation video made was spot on and installation went smoothly. Thank you 1aauto.
October 25, 2017
Window motor unit
This part showed up on time and fit perfectly. Even came with new bolts to replace the old rivets. The installation video was right on as well. The only reason Im not giving it 5 stars is because the vertical metal piece that the nylon slide slides up and down on needs lubed up with lithium grease in order for the glass to go up nice and straight. There was no mention of that in the video or the instruction sheet so I was fumbling around trying to adjust the bolts for awhile before I decided to just spray it down with the grease. If you dont do this the glass binds up as it nears the top and wont go up all the way.
January 29, 2018
regulator power window
This went so well with your video on replacing the regulator in less then 2 hours .The part fit just like new.This is something I didn,t want to do for fear of what the shop had told me what it would take .Thank you again for all the help.Yes I will buy more parts from you.
March 20, 2018
Review of parts and video
First of all the web site was just great. Easy to identify the correct part. Watch the video was very helpful, I have installed a Window Regulator before but on a different vehicle, so the video was very helpful. Received the part within a week and waited for good weather and installed it. Had some trouble with the old part and removing the window. I drilled a different hole to remove the last rivet holding the window. It worked out just fine and very pleased with the outcome.
May 24, 2018
Worked fine
Saved a lot of $. Worked fine. Video was very helpful
July 30, 2018
Outstanding Product and Support
Purchased for my 1997 Crown Victoria. It was great having the how-to video available for installation help. Followed directions and had new window working again in no time!
August 9, 2018
exact part
The Ford window regulator I bought here from 1A AUTO is the exact, perfect fit part that was originally installed in the 2010 Grand Marquis I was working on. The part here even came with the replacement bolts that went in where the Ford rivets were. One thing I would mention though is that the regulator will need to be brought into position and this will have to be done by reconnecting the power temporarily so that the brace holes all line up. That threw me for a second. Also, it may take some finagling for guys with big hands like me to get at the furthest bolts. Over all, the job wasnt too difficult...about 2 hours. It should go quicker for me next time!
August 21, 2018
Issue solved and corrected
In the past most purchases have gone as expected. Recently that did not happen as the part ordered was mislabeled both on the box and the bag the part was in. !A had to check for the problem in their warehouse and notified me that had corrected the labeling issue and were sending the correct part and that I also didnt need to return the mislabeled part.
November 27, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1992-2011Ford Crown Victoria Ford Crown Victoria Rear Power Window Regulator with Motor Passenger Side
1992-2010Mercury Grand Marquis Mercury Grand Marquis Rear Power Window Regulator with Motor Passenger Side
2003-2004Mercury Marauder Mercury Marauder Rear Power Window Regulator with Motor Passenger Side
Part #: 1AWRG00253

Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(19:34 min)