Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Specifications:

  • Fits RH (Passenger Side) FRONT
  • Includes power window motor
  • Direct replacement
  • Replaces dealer part number: 4L2Z-7823201-BA, 4L2Z7823201BA
  • Built to strict quality control standards

Please Note:

This window regulator is a high quality aftermarket part that meets or exceeds the performance of the original. It has been subjected to extensive testing and quality control standards. That is why we offer this regulator with our superior warranty!

Direct Fit

Direct fit, pre-assembled parts made ready to fit your vehicle and provide easy and trouble-free installation.

Rigorously Tested

Build to strict quality standards

Highest Quality Materials

Made from the highest quality materials for extreme durability and premium performance.

Part Details

  • Operation: Power
  • Regulator Option: with Motor

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Door Panel (0:47)
    • Pry off the side trim piece next to the window switch panel with a rag and flat blade screwdriver
    • Pry up the window switch panel with a flat blade screwdriver
    • Disconnect the wiring harnesses
    • Pry off the trim piece from the pull handle
    • Remove the two 7mm bolts in the switch
    • Remove the two 7mm bolts in the door pull
    • Remove the two 7mm bolts on the bottom of the door panel
    • Pry off the mirror switch with a flat blade screwdriver
    • Disconnect the mirror switch wiring harness
    • Pull the door panel up and off
    • Disconnect the door lock cable with a flat blade screwdriver
    • Remove four 6mm screws from the speaker
    • Disconnect the speaker wiring lead
    • Pull off the speaker
    • Carefully peel back the water shield
  2. step : Removing the Window Regulator (4:12)
    • Remove the 6mm bolts from the padding
    • Remove the padding
    • If your window is stuck, cut the cable so it can move freely
    • Slide the window up to access the rivets
    • Punch out the center of the two rivets that hold the window to the regulator with a pick and hammer
    • Remove the window by hand
    • Remove the five 11mm bolts from the regulator
    • Pull the window regulator out through the door
  3. step : Reinstalling the Regulator (8:07)
    • Remove the mounting stud with a pair of pliers
    • Insert the mounting stud to the new regulator with a pair of pliers
    • Remove the wire tires from the new regulator
    • Insert one of the bolts into the new window regulator
    • Push the regulator into the door
    • Hang the regulator by its bolt
    • Tighten the bolts into the regulator
    • Wire-tie any excess pigtail
    • Remove any remaining rivets from the window
    • Lower the window onto the regulator
    • Secure the window to the regulator with a rivet gun or an M6 bolt and washer
    • Connect the window motor lead
    • Tighten the 6mm bolts to the padding
  4. step : Reinstalling the Door Panel (12:55)
    • Put the speaker into place
    • Connect the speaker wiring lead
    • Insert the four 6mm bolts into the speaker
    • Put the water shield into place
    • Connect the door lock cable to the door handle
    • Lift the door panel into place
    • Push in the door panel clips
    • Lightly tighten the two 7mm bolts on the bottom of the door panel
    • Tighten the two 7mm bolts in the switch
    • Tighten the two 7mm bolts in the door pull
    • Connect the wiring harnesses to the window switch panel
    • Push the window switch panel into place
    • Push on the trim piece next to the window switch panel
    • Push on the door pull trim piece

Tools needed for replacement:

    Drills, Drill Bits & Related

  • 3/8 Inch Drill Bit
  • 1/2 Inch Drill Bit

  • General Tools

  • Center Punch
  • Hammer

  • Materials, Fluids, and Supplies

  • Coarse Threaded Bolts (to replace rivets)
  • Wire Ties

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 11mm Socket
  • 7mm Socket
  • 6mm Socket

  • Specialty Tools

  • Rivet Gun & Rivets

4.50/ 5.0
4 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
3
0
1
0
0
window regulator
very pleased with the widow regulator replacement i purchase and the installation video very helpful making the job easy
February 23, 2018
Noisy. Regulator needs lube. Works great other than that. Easy to install.
June 9, 2018
2002 Ford Explorer Window Regulator
Ordered the subject part It arrived very quickly and went with no issue. Window works perfectly Would order from 1A Auto again
June 25, 2018
Window regulator
Top quality products come from this buisness. I will buy from them many more times.
August 14, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2002-2010Ford Explorer Ford Explorer 4 Door Front Power Window Regulator with Motor Passenger Side
2007-2010Ford Explorer Sport Trac Ford Explorer Sport Trac Front Power Window Regulator with Motor Passenger Side
2003-2005Lincoln Aviator Lincoln Aviator Front Power Window Regulator with Motor Passenger Side
2002-2010Mercury Mountaineer Mercury Mountaineer Front Power Window Regulator with Motor Passenger Side
Part #: 1AWRG00204


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(16:05 min)