Part Details

  • Regulator Option: without Motor
  • Operation: Power

Specifications:

  • LH (Driver Side) Front
  • Power operation
  • Does not include power window motor

Please Note:

This window regulator is designed to work with factory style motors only.  Due to variations in aftermarket designs, replacement motors may not have the correct gear style.

Please Note:

This window regulator is a high quality aftermarket part that meets or exceeds the performance of the original. It has been subjected to extensive testing and quality control standards. That is why we offer this regulator with our superior warranty!

Rigorously Tested

Build to strict quality standards

Highest Quality Materials

Made from the highest quality materials for extreme durability and premium performance.

Item Condition: New

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Door Panel (0:45)
    • Pry up the switch panel with a flat blade screwdriver
    • Disconnect the switch panel wiring harnesses
    • Pry off the trim piece inside the door handle with a flat blade screwdriver
    • Remove the T30 bolt inside the door handle
    • Remove the three 7mm bolts along the outside of the door panel
    • Pry off the triangular trim at the front top corner of the door panel with a flat blade screwdriver
    • Remove the 7mm bolt inside the door pull
    • Lift the door panel up and off
    • Remove the three Phillips screws from the speaker
    • Pull off the speaker
    • Disconnect the speaker wiring lead
  2. step : Removing the Window Regulator (2:12)
    • Remove the metal rail using a hammer and punch on the rivets
    • Drill out the center of the rivets with a 3/8 drill bit
    • Carefully peel off the water shield
    • Punch out the centers of the rivets on the regulator with a hammer and punch
    • Drill out the rivet centers with a 3/8 drill bit
    • Connect the wiring harnesses to the switch panel
    • Lower the window
    • Punch out the center of the rivets that hold the window to the regulator
    • Drill the rivets out without breaking the window glass
    • Pry off the covers on the window with a flat blade screwdriver
    • Remove the weatherstrip
    • Raise the window by hand
    • Pull the window up and out
    • Disconnect the window motor lead
    • Remove the 11mm nuts at the top of the regulator
    • Pull the window regulator out through the door
  3. step : Installing the New Window Regulator (5:57)
    • Insert one of the bolts into the window regulator
    • Push the regulator into the door
    • Hang the regulator by its bolt
    • Tighten the 11mm nuts to the regulator
    • Insert 10mm bolts into the regulator where the rivets are
    • Connect the window motor to the lead
    • Lower the window into the door
    • Replace the weatherstrip
    • Replace the protectors on the window
    • Lower the window onto the regulator
    • Insert the two 10mm bolts that hold the window to the regulator
  4. step : Resetting the Motor (7:55)
    • Connect the window switch wiring harness
    • Turn the vehicle on
    • Run the motor up for 4 seconds
  5. step : Reinstalling the Door Panel (8:17)
    • Put the water shield into place
    • Replace the metal rail with two 10mm bolts
    • Put the speaker into place
    • Insert the three Phillips screws into the speaker
    • Connect the speaker wiring lead
    • Lift the door panel into place
    • Push in the door panel clips
    • Replace the three 7mm bolts along the outside of the door panel
    • Replace the 7mm bolt inside the door pull
    • Insert the T30 bolt inside the door handle
    • Insert the trim piece inside the door handle with a flat blade screwdriver
    • Insert the triangular trim at the front top corner of the door panel with a flat blade screwdriver
    • Connect the switch panel wiring harnesses
    • Push in the switch panel

Tools needed for replacement:

    Drills, Drill Bits & Related

  • 3/8 Inch Drill Bit
  • Drill

  • General Tools

  • Hammer
  • Center Punch

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 7mm Socket
  • 11mm Socket
  • 10mm Socket

  • Torx Drivers & Sockets

  • T30 Torx Driver

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
1992-2011Ford Crown Victoria Ford Crown Victoria Front Power Window Regulator without Motor Driver Side
1992-2010Mercury Grand Marquis Mercury Grand Marquis Front Power Window Regulator without Motor Driver Side
2003-2004Mercury Marauder Mercury Marauder Front Power Window Regulator without Motor Driver Side

This part replaces:

  • Partslink FO1350106
  • Hollander 125-01985A
  • Dorman 740-664
  • Hollander 125-01985B
  • Hollander 125-01985C
  • OE # F3AZ5423209B
  • OE # 6W7Z5423209A
Only 3 left in stock
Part #: 1AWRG00039


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(10:25 min)