Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Regulator Option:   with Motor
  • Quantity:   Pair
  • Operation:   Power

Specifications:

  • Comes as a Pair
    • Fits both the LH (Driver Side) & RH (Passenger Side) Rear
  • Power operation
  • Direct replacements
  • Built to strict quality control standards

Please Note: These window regulators are high quality aftermarket parts that meets or exceeds the performance of the original. They have been subjected to extensive testing and quality control standards. That is why we offer these regulators with our superior warranty!

Installation

  • This repair is easier than you may think. You'll find our installation videos helpful. In our experience removing and replacing the door panel is the most involved step in the repair. On most vehicles this only requires removing a few screws and push-in clips.
  • You'll get a great feeling of accomplishment after you complete this repair knowing you saved money, and you didn't have to give up your car for a day at the repair shop. Your passengers and other drivers will be amazed.

Fit guaranteed

  • 1A Auto will refund you with no hassle if this window regulator does not fit the application stated.
  • This regulator will install just as your original does. Save time and money.

Quality

  • Be confident this part will work right. Every regulator is tested after assembly to make sure all mechanisms are working correctly.
  • It is important that your new regulator works for a long period of time. The design of this regulator is tested to withstand 10,000 cycles. That is enough to raise and lower your window 3 times per day for 9 years.

Value

  • Windows that don't work can be frustrating. They can also hurt your vehicles value. An inoperable window could mean $200-$500 discounted off a dealer trade value or asking price.
  • Some shops and dealers charge more for parts and repairs when they think you don't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly repair bill.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

    If your window is stuck in the up position, remove the 10mm bolts from the regulator and motor before loosening the screws from the window

  1. step : Removing the Door Panel (0:36)
    • Remove the Phillips head screw inside the door pull
    • Remove the Phillips head screw inside the door handle
    • Pull the door handle forward
    • Pry out the clip on the door handle from the door lock rod
    • Pry out the along the door panel
    • Lift the door panel up and off
    • Disconnect the wiring harness
    • Remove the two Phillips screws from the bracket
    • Remove the bracket
    • Carefully peel off the water shield
  2. step : Removing the Window Regulator (1:58)
    • Push on the tabs and remove the window motor lead from the door
    • Disconnect the window motor lead
    • Loosen the two Phillips screws that hold the window to the regulator
    • Raise the window by hand
    • Hold the window in place with painter's tape
    • Remove the six 10mm bolts from the regulator
    • Pull the window regulator out through the door
  3. step : Installing the New Window Regulator (3:37)
    • Push the regulator into the door
    • Hand the regulator by its studs
    • Insert the six 10mm bolts into the regulator
    • Connect the window motor lead
    • Remove the painter's tape from the window
    • Lower the window onto the regulator
    • Insert the two Phillips screws that hold the window to the regulator
  4. step : Reinstalling the Door Panel (5:08)
    • Put the water shield into place
    • Insert the two Phillips screws into the metal bracket
    • Connect the wiring harness
    • Lift the door panel into place
    • Push in the door panel clips
    • Push the door handle rod into the door handle and re-clip the door handle
    • Insert the Phillips screw into the door handle
    • Insert the Phillips screw into the door pull

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Painter's Tape

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1999-2004Chevy Tracker Chevy Tracker Rear Power Window Regulator with Motor Pair
1999-2005Suzuki Grand Vitara Suzuki Grand Vitara Rear Power Window Regulator with Motor Pair
2002-2006Suzuki XL-7 Suzuki XL-7 Rear Power Window Regulator with Motor Pair
Part #: 1AWRK00489


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(06:41 min)