Replaces

Window Regulator Pair - 1AWRK00763

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Regulator Option:   with Motor
  • Quantity:   Pair
  • Operation:   Power

These replacement window regulators are just what you need to get your vehicle in good shape again!

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • Include the power window motors
  • Replaces dealer part numbers: 5065471AC, 5065471AD, 5065471AF, 5065470AC, 5065470AD, 5065470AE, 5065470AF
  • Power operation
  • Direct replacements
  • Built to strict quality control standards
  • Fit models WITHOUT Anti Pinch option
  • Fit models WITHOUT One Touch Down option

These window regulators make great replacements and have good cost savings over dealer units.

Installation

  • This repair is easier than you may think. You'll find our installation tips helpful. In our experience removing and replacing the door panel is the most involved step in the repair. On most vehicles this only requires removing a few screws and push in clips.
  • You'll get a great feeling of accomplishment after you complete this repair knowing you saved money and you didn't have to give up your car for a day at the repair shop. Your passengers and other drivers will be amazed.

Fit guaranteed

  • 1A Auto will refund you with no hassle, if this Window regulator does not fit the application stated.
    • You can use your existing hardware and wiring harnesses. This Regulator will install just as your original does. Save time and money.

Quality

  • Be confident this part will work right. Every regulator is tested after assembly to make sure the cables and all mechanisms are working correctly.
  • It is important that your new regulator works for a long period of time. The design of this regulator is tested to withstand 10,000 cycles. That is enough to raise and lower your window 3 times per day for 9 years.
  • Nothing is more frustrating than taking your car apart and finding the part you purchased does not fit. You want the part to fit. This design is test fit on an actual door. When you install it you will have no issues.

Value

  • Windows that don't work can be frustrating. They can also hurt your vehicles value. An inoperable window could mean $200-$500 discounted off a dealer trade value or asking price.
  • Some shops and dealers charge more for parts and repairs when they think you don't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly repair bill.

Please Note: These window regulators are high quality aftermarket parts that meets or exceeds the performance of the original. They have been subjected to extensive testing and quality control standards. That is why we offer these regulators with our superior warranty!

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Door Panel (0:57)
    • Pry off the trim piece inside the door handle with a pick
    • Remove the Phillips head screw inside the door handle
    • Remove the three color-matched plastic clips from the door panel with a pick
    • Remove the three Phillips head screws from the bottom of the door panel
    • Remove the Phillips head screw at the front of the door panel
    • Pry out the door pull screw cover with a trim tool
    • Remove the Phillips head screw below the door pull
    • Unclip the door panel from the door
    • Unclip the latch rod from the door handle
    • Disconnect the mirror switch wiring harness
    • Disconnect the window switch wiring harnesses
    • Unclip the wire harness retainers from the door panel
    • Disconnect the courtesy light door panel
    • Disconnect the door control module wiring harnesses
    • Unclip the door control module from the door with trim tools
    • Unclip the wire harness retainers from the door with trim tools
    • Separate the weathershield from the door with a utility knife
    • Carefully peel off the weather shielding
  2. step : Raising the Window (4:31)
    • Push out the window switch tabs
    • Pull the window switch out of the door panel
    • Connect the door control module wiring harness
    • Allow the door control module to hang
    • Connect the window switch wiring harness
    • Connect the window switch wiring harness
    • Turn the ignition to the accessory position
    • Raise the window with the switch to access the window rail bolts
    • Disconnect the window switch wiring harness
    • Turn the ignition to the off position
  3. step : Removing the Window Regulator (5:38)
    • Loosen the two 10mm bolts from the window rail
    • Lift the window by hand
    • Hold the window in place with painter's tape
    • Remove the 10mm bolt from the bottom of the door brace
    • Loosen the 10mm bolt at the top of the door brace
    • Lift the door brace up and out of the door
    • Remove the 10mm bolt from the bottom of the regulator
    • Loosen the two 10mm bolts at the top of the regulator
    • Remove the four Phillips head screws from the speaker
    • Pull the speaker off
    • Disconnect the speaker wiring harness
    • Remove the 10mm bolt behind the speaker
    • Slide the regulator off its keyways
    • Disconnect the window motor wiring harness
    • Pull the regulator out of the door
  4. step : Installing the Window Regulator (8:48)
    • Slide the regulator into the door
    • Connect the window motor wiring harness
    • Hang the window regulator by its top bolts
    • Insert the 10mm bolt behind the speaker
    • Insert the 10mm bolt at the bottom of the regulator
    • Hang the door brace by its top 10mm bolt
    • Insert the bottom 10mm bolt into the door brace
    • Tighten the six 10mm screws
    • Remove the painters tape from the window
    • Lower the window onto the rail
    • Tighten the two 10mm bolts for the window rail
  5. step : Installing the Door Panel (10:27)
    • Disconnect the door control module wiring harness
    • Put the weather shielding into place
    • Connect the speaker wiring harness
    • Insert the four Phillips head screws into the speaker
    • Connect the door control module wiring harness
    • Clip the door control module into place
    • Clip the wiring harnesses to the door
    • Clip the window switch into the door panel
    • Connect the courtesy light wiring harness
    • Connect the mirror switch wiring harness
    • Connect the window switch wiring harnesses
    • Connect the latch rod to the door handle
    • Put the door panel into place
    • Snap in the door panel clips
    • Push the three plastic clips into the door panel
    • Insert the three Phillips head screws at the bottom of the door panel
    • Insert the Phillips head screw at the front of the door panel
    • Insert the Phillips head screw below the door pull
    • Insert the Phillips head screw inside the door handle
    • Push on the door pull screw cover
    • Push on the door handle screw cover

Tools needed for replacement:

    General Tools

  • Pick
  • Utility Knife

  • Materials, Fluids, and Supplies

  • Gloves
  • Painter's Tape

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Specialty Tools

  • Trim Tool Set

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2005-2010Chrysler 300 Chrysler 300 without Anti-Pinch Option Front Power Window Regulator with Motor Pair
2006-2009Dodge Charger Dodge Charger without Anti-Pinch Option Front Power Window Regulator with Motor Pair
2005-2008Dodge Magnum Dodge Magnum without Anti-Pinch Option Front Power Window Regulator with Motor Pair
Part #: 1AWRK00763


Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(13:56 min)