These replacement window regulators are just what you need to get your vehicle in good shape again!

Specifications:

  • Comes as a PAIR
    • Fits both the LH (Driver Side) & RH (Passenger Side) FRONT DOORS
  • Power window regulators
  • Does NOT include the power window motors
  • Replaces dealer part numbers: 16629471, 16629470
  • Direct replacements
  • Built to strict quality control standards

These window regulators make good replacements and have substantial cost savings over the dealer units.

Please Note:  These window regulators are designed to work with factory style motors only.  Due to variations in aftermarket designs, replacement motors may not have the correct gear style.

Please Note: These window regulators are high quality aftermarket parts that meets or exceeds the performance of the original. They have been subjected to extensive testing and quality control standards. That is why we offer these regulators with our superior warranty!

Installation

  • This repair is easier than you may think. You'll find our installation videos helpful. In our experience removing and replacing the door panel is the most involved step in the repair. On most vehicles this only requires removing a few screws and push-in clips.
  • You'll get a great feeling of accomplishment after you complete this repair knowing you saved money, and you didn't have to give up your car for a day at the repair shop. Your passengers and other drivers will be amazed.

Fit guaranteed

  • 1A Auto will refund you with no hassle if this window regulator does not fit the application stated.
  • This regulator will install just as your original does. Save time and money.

Quality

  • Be confident this part will work right. Every regulator is tested after assembly to make sure all mechanisms are working correctly.
  • It is important that your new regulator works for a long period of time. The design of this regulator is tested to withstand 10,000 cycles. That is enough to raise and lower your window 3 times per day for 9 years.

Value

  • Windows that don't work can be frustrating. They can also hurt your vehicles value. An inoperable window could mean $200-$500 discounted off a dealer trade value or asking price.
  • Some shops and dealers charge more for parts and repairs when they think you don't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly repair bill.
Rigorously Tested

Build to strict quality standards

Highest Quality Materials

Made from the highest quality materials for extreme durability and premium performance.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Remove the door panel (0:59)
    • Pry up the switch plate and disconnect the power window switch from the wiring harness.
    • Remove the two 10 mm bolts in the door pull.
    • Unclip the door panel by working around the edges and pulling outward.
    • Lift the door panel up and off.
    • Carefully peel back the water shield
  2. step : Remove the window regulator (3:35)
    • Disconnect your window from the window regulator by pressing the tabs on the clips and unlatching them.
    • Tape your window up out of the way.
    • Use your pliers to release the balance spring and set it aside.
    • Remove the window regulator.
    • Uncrimp the window regulator with your pliers and slide it out of the window track.
  3. step : Install the new window regulator (6:01)
    • Slide the new regulator into the window track.
    • Insert the assembly into the door.
    • Mount the tracks back into place in the door.
    • Replace the balancing spring and lock bolt.
    • Plug the power window switch in to test the regulator.
    • Unplug the power window switch after you have made any necessary adjustments
    • Use your pliers to tighten the balancing spring back into place.
    • Untape the window and slowly lower it back into the clips in the regulator.
  4. step : Reinstall the door panel (9:25)
    • Replace the water shield.
    • Thread the wiring through the panel.
    • Clip the door panel back onto the door.
    • Replace the door handle bezel.
    • Bolt the two 10 mm bolts back into the door panel.
    • Connect the control switch panel and clip it back into the door pull.

Tools needed for replacement:

    Pliers, Cutters & misc Wrenches

  • Channel-Lock Pliers

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2005-2007 Buick Terraza Front Power Window Regulator without Motor Pair
  • 2005-2009 Chevy Uplander Front Power Window Regulator without Motor Pair
  • 1997-2005 Chevy Venture Front Power Window Regulator without Motor Pair
  • 1997-2004 Olds Silhouette Front Power Window Regulator without Motor Pair
  • 1999-2005 Pontiac Montana Front Power Window Regulator without Motor Pair
  • 1997-1998 Pontiac Trans Sport Front Power Window Regulator without Motor Pair
  • 2005-2007 Saturn Relay Front Power Window Regulator without Motor Pair

This part replaces:

  • Dorman 740-692,740-693
Part #: 1AWRK00296


How-to Video:

(11:30 min)