This Olds Cutlass and Chevy Malibu window regulator is just what you need to get your vehicle in good shape again!

Specifications:

  • LH (Driver Side) FRONT DOOR
  • Replaces dealer part numbers: 22723561, 22677167
  • Built to strict quality control standards
  • Motor is not included

For vehicles needing info with a VIN code: You can find your vehicles VIN (vehicle identification number) in the driver's side lower corner of the windshield near the A pillar, on your title, or on your state registration.

Now you can buy just the part that breaks instead of having to buy the entire inside door mounting panel from GM!

This Olds Cutlass and Chevy Malibu window regulator makes a great replacement and has good cost savings over a dealer unit.

Please Note:  This window regulator is designed to work with factory style motors only.  Due to variations in aftermarket designs, replacement motors may not have the correct gear style.

Please Note: This window regulator is a high quality aftermarket part that meets or exceeds the performance of the original.  It has been subjected to extensive testing and quality control standards.  That is why we offer this regulator with our superior warranty!

Rigorously Tested

Build to strict quality standards

Highest Quality Materials

Made from the highest quality materials for extreme durability and premium performance.

Part Details

  • Operation: Power
  • Regulator Option: without Motor

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Disconnecting the Battery (0:57)
    • Disconnect the Negative battery cable with am 8mm wrench
  2. step : Removing the Door Panel (1:11)
    • Pry off the trim behind the door pull with a flat blade screwdriver
    • Pry off the window switch panel with a flat blade screwdriver
    • Disconnect the window switch wiring harness
    • Pry off the mirror base bezel with a flat blade screwdriver
    • Remove the Phillips head screw from inside the door handle
    • Remove the two 7mm bolts from behind the door pull
    • Pry off the door handle bezel with a flat blade screwdriver
    • Disconnect the door lock wiring harness from the door handle bezel
    • Pry the door panel off by hand
    • Carefully peel back the water shield
    • For more detailed instructions, please see the 2001 Malibu door panel replacement video
  3. step : Removing the Window Regulator (2:41)
    • Push out the window motor tabs with a screwdriver
    • Pull out the window motor
    • Disconnect the window motor wiring harness
    • Pry the spring out with a flat blade screwdriver
    • Pull the spring around and off with the pliers
    • Lower the window by hand
    • Loosen the 10mm bolts that hold the window to the regulator
    • Lift the window by hand
    • While supporting the regulator, remove the regulator gear
    • Slide the regulator out of the door
  4. step : Installing the New Window Regulator (5:10)
    • Slide the new regulator into the door
    • Put the regulator wheel into the track
    • Insert the regulator gear
    • Raise the regulator by hand
    • Push the window motor onto its posts
    • Lower the window by hand
    • Remove the 10mm nuts from the old regulator
    • Start the 10mm nuts that hold the window to the regulator by hand
    • Tighten the 10mm nuts
    • Put the spring into place about a half turn from its final position
    • Pull the spring into place with the pliers
  5. step : Reinstalling the Door Panel (9:34)
    • Put the water shield back on, pulling through all the wiring harnesses
    • Put the door panel into place, pulling through all the wiring harnesses
    • Reconnect the window switch wiring harnesses
    • Push the window switch panel into place
    • Connect the door lock wiring harness to the door handle bezel
    • Push the door handle bezel into place
    • Insert the Phillips head screw into the door handle
    • Insert the two 7mm bolts behind the door pull
    • Push in the trim piece behind the door pull
    • For more detailed instructions, please see the 2001 Malibu door panel replacement video
  6. step : Reconnecting the Battery (9:59)
    • Connect the negative battery cable using an 8mm wrench

Tools needed for replacement:

    Pliers, Cutters & misc Wrenches

  • Slip-Joint Pliers

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 7mm Socket

  • Wrenches - Metric

  • 9mm Wrench

5.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
0
0
0
0
Chevy regulator
Just what I expected and works great, easy to install thanks to the video. Thank you
March 29, 2017
Purchased
1 year ago
Regulater
The regular work great customer service over the phone was great came in right on time and I would recommend you a service to anybody
March 7, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
I have a 2001 chevy Malibu with manual windows. Since this item does not include a motor will it fit my car?
Chris M on Mar 30, 2017
BEST ANSWER: This will still be shaped for a power window. At this time we do not offer a manual window regulator for your 2001 Malibu, but recommend www.partfinder.com

Vehicle Fit

  • 2004-2005 Chevy Classic Front Power Window Regulator without Motor Driver Side
  • 1997-2003 Chevy Malibu Front Power Window Regulator without Motor Driver Side
  • 1997 Olds Cutlass (excluding Supreme Models) Front Power Window Regulator without Motor Driver Side
  • 1998-1999 Olds Cutlass Front Power Window Regulator without Motor Driver Side

This part replaces:

  • OE # 22677167
  • OE # 22723561
  • Hollander 125-01887L
  • Dorman 740-821
Part #: 1AWRG00382

How-to Video:

(11:01 min)