Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Regulator Option:   with Motor
  • Operation:   Power

This window regulator is a high quality replacement. The benefit of our regulator is our manufacturer. They studied the faults of the original equipment manufacturer, then made changes and re-engineered to correct those faults.

Specifications:

  • Fits LH (Driver Side) FRONT
  • Power operation
  • Replaces dealer part numbers: 80721-2Y000, 80731-2Y900, 807212Y000, 807312Y900
  • Includes the Power Window Motor
  • Motor has a 6 Pin Connector
  • Direct replacement
  • Built to strict quality control standards

Window Regulator Installation Tips and FAQ.

This part makes a great replacement and has substantial cost savings over a dealer unit.

Please Note:

We are committed to offering the absolute best value for our customers. If you want a highest quality window regulator at a great price, please see our other "High Quality" window regulator listings. If price is your main concern, we are offering this economy style window regulator as well. It is the same one that most internet sellers are offering. While this window regulator is a good replacement, it is not backed by the same warranty as our high quality regulator.

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Door Panel (0:46)
    • Pop off the cover at the front top corner of the door panel with a flat blade screwdriver
    • Pry off the trim piece inside the door pull with a flat blade screwdriver
    • Pry off the door handle bezel with a flat blade screwdriver
    • Remove the Phillips head screw at the front top corner of the door panel
    • Remove the Phillips head screw inside the door pull
    • Pull the switch panel up by hand
    • Disconnect the door lock wiring harness
    • Disconnect the window switch wiring harnesses
    • Pry out the door panel with a door panel clip tool or putty knife
    • Lift the door panel up and off
    • Disconnect the door module wiring harness
    • Disconnect the courtesy light wiring harness
    • Disconnect the memory seat wiring harness
    • Remove the two bolts from the regulator bracket
    • Carefully remove the water shield
  2. step : Removing the Window Regulator (4:21)
    • Disconnect the window motor lead
    • Remove the two 10mm bolts that hold the window to the regulator
    • Raise the window by hand
    • Tilt the window forward and remove it
    • Loosen one and remove three 10mm bolts from the regulator
    • Remove the three 10mm bolts from the window motor
    • Pull the window regulator out through the door
  3. step : Installing the New Window Regulator (6:56)
    • Transfer the 10mm bolt from the old regulator to the new one
    • Insert one of the bolts into the window regulator
    • Push the regulator into the door
    • Hang the regulator by its bolt
    • Insert and tighten the three 10mm bolts into the regulator
    • Insert and tighten the three 10mm bolts from the window motor
    • Connect the window motor to the lead
    • Lower the window onto the regulator
    • Insert the two 10mm bolts that hold the window to the regulator
  4. step : Testing the Motor (10:35)
    • Connect the window switch wiring harness
    • Turn the vehicle on
    • Run the motor up for 4 seconds
    • Disconnect the window switch wiring harness
  5. step : Reinstalling the Door Panel (11:01)
    • Put the water shield into place
    • Insert and tighten the two 10mm bolts into the regulator bracket
    • Connect the door module wiring harness
    • Connect the courtesy light wiring harness
    • Connect the memory seat wiring harness
    • Lift the door panel into place
    • Push in the door panel clips
    • Insert the Phillips screw at the top front corner of the door panel
    • Connect the door lock wiring harness
    • Connect the window switch wiring harnesses
    • Clip in the switch panel
    • Replace the door handle bezel
    • Insert the Phillips head screw inside the door pull
    • Insert the cover at the front top corner of the door panel with a flat blade screwdriver

Tools needed for replacement:

    General Tools

  • Putty Knife

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

4.80/ 5.0
5 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
4
1
0
0
0
Quality Part and Excellent Video Training for the DIY
I was very impressed with the replacement part. Im not a mechanic by any means but decided to tackle this job on our 2001 Infiniti I30 after reading the reviews and watching the installation video numbers times. Part was delivered promptly, packaged for damage protection and packed safety. I will be using 1AAUTO for all my future part needs and highly recommending them to other people. Thanks again for the excellent quality and service!
January 23, 2017
Perfect replacement!
The window regulator/motor works great! The hardest part was verifying if I needed the 2-pin or 6-pin version. Thanks to the videos on the website, my husband was able to easily to move my door panel and unhook the old regulator to see I needed a 6-pin version. The part arrived very quickly (3 days) and was well packaged. My husband was able to change the regulator in less than an hour! The auto up/down window feature works so Im a happy customer. Id checked the dealer for the parts and they were six times more than 1A Auto!! This was for parts only!! Ill will definitely check out 1A Auto for any future parts I may need!
January 29, 2018
A1 video was great for this installation. The part is working well. Would recommend doing this install if your window motor is broken.
March 25, 2018
Fair price for a pretty good part
I closed the door one day and my window fell down on my 03 Maxima. I took the door panel off and sure enough, the plastic on the piece that goes up and down broke so the window wouldnt stay up. I ordered this part and it arrived quickly. Thanks to the 1A Auto video, I felt pretty comfortable doing the repair and this was the first time Ive taken a door panel off a car. It took me maybe 30-45 minutes to do. The motor works great and retains the auto up/down functionality, the only slight hit I took a star off for is its not as fast as my passenger side window (which to my knowledge is the original from Nissan) and the motor is a bit noisier as well. Functionally its perfectly fine though and Im happy my window is working properly again!
April 29, 2018
Great site for parts
Have order parts before all arrive quick and perfit for app this window motor was amazing fast and as usual YouTube instruction are good but not always exact
October 17, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Does this have the auto up feature?
Chuck H February 27, 2017
Yes it does
Jesse R February 28, 2017
Yes
Ryan M February 28, 2017
Yes
Kevin W February 28, 2017
Yes
Roy S February 28, 2017
Yes
Leroy B February 28, 2017
Yes, this will be wired for the auto up feature just as your original equipment.
Alex P February 28, 2017
Yes
Robert B February 28, 2017
Year Make Model Description
2000-2001Infiniti I30 Infiniti I30 with 6 Terminal Connector Front Power Window Regulator with Motor Driver Side
2002-2004Infiniti I35 Infiniti I35 with 6 Terminal Connector Front Power Window Regulator with Motor Driver Side
2000-2003Nissan Maxima Nissan Maxima with 6 Terminal Connector Front Power Window Regulator with Motor Driver Side
Part #: 1AWRG00322


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(12:58 min)