This replacement window regulator with motor is just what you need to get your vehicle in good shape again!

Specifications:

  • LH (Driver Side) REAR
  • Includes the power window motor
  • Replaces dealer part numbers: 6L3Z1627001AA, 6L3Z 1627001 AA
  • Power operation
  • Direct replacement
  • Built to strict quality control standards
  • Fits New Body F150 Crew Cab (SuperCrew) and Lincoln Mark LT models only
    • Does NOT fit Classic Body Style Heritage Models

This window regulator with motor makes a great replacement and has good cost savings over a dealer unit.

 

Please Note: This window regulator is a high quality aftermarket part that meets or exceeds the performance of the original.  It has been subjected to extensive testing and quality control standards.  That is why we offer this regulator with our superior warranty!

Installation

  • This repair is easier than you may think. You'll find our installation videos helpful. In our experience removing and replacing the door panel is the most involved step in the repair. On most vehicles this only requires removing a few screws and push in clips.
  • You'll get a great feeling of accomplishment after you complete this repair knowing you saved money, and you didn't have to give up your car for a day at the repair shop. Your passengers and other drivers will be amazed.

Fit guaranteed

  • 1A Auto will refund you with no hassle, if this Window regulator does not fit the application stated.
    •  This Regulator will install just as your original does. Save time and money.

Quality

  • Be confident this part will work right. Every regulator is tested after assembly to make sure all mechanisms are working correctly.
  • It is important that your new regulator works for a long period of time. The design of this regulator is tested to withstand 10,000 cycles. That is enough to raise and lower your window 3 times per day for 9 years.
  • Nothing is more frustrating than taking your car apart and finding the part you purchased does not fit. You want the part to fit. This design is test fit on an actual door. When you install it, you will have no issues.

Value

  • Windows that don't work can be frustrating. They can also hurt your vehicles value. An inoperable window could mean $200-$500 discounted off a dealer trade value or asking price.
  • Some shops and dealers charge more for parts and repairs when they think you don't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly repair bill.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Door Panel (0:40)
    • Pry off the trim piece inside the door handle with a flat blade screwdriver
    • Pry up the window switch panel with a flat blade screwdriver
    • Disconnect the window switch wiring harnesses
    • Pull off the side panel next to the window
    • Remove the 6mm bolt next to the window
    • Remove the two 8mm bolts inside the door handle
    • Remove the 10mm bolt inside the door pull
    • Remove the two 6mm bolts at the bottom of the door panel
    • Pry out the door panel
    • Lift the door panel up and off
    • Disconnect the latch cables from the door handle
    • Remove the 5.5mm or 7/32 bolts from around the speaker
    • Pull off the speaker
    • Disconnect the speaker wiring lead
    • Carefully peel off the water shield
  2. step : Removing the Window Regulator (2:34)
    • Loosen the two 10mm bolts that hold the window to the regulator
    • Pry your fingers between the cushions holding the window
    • Raise the window by hand
    • Hold the window in place with painter's tape
    • Disconnect the window motor lead
    • Remove the four 10mm bolts from the regulator
    • Remove the 10mm bolt from the window motor
    • Unclip the wire on the door
    • Pull the window regulator out through the door
  3. step : Installing the New Window Regulator (5:09)
    • Push the regulator into the door
    • Hang the regulator by its bolts
    • Tighten the four 10mm bolts into the regulator
    • Tighten the 10mm bolt into the regulator motor
    • Push the clip into the door
    • Connect the window motor to the lead
  4. step : Testing the Regulator (6:29)
    • Connect the window switch to the switch panel
    • Turn the vehicle on
    • Run the motor up for 4 seconds
    • Disconnect the switch panel
  5. step : Reinstalling the Door Panel (7:12)
    • Put the water shield into place
    • Insert the 5.5mm or 7/32 bolts around the speaker
    • Connect the speaker wiring lead
    • Put the speaker into place
    • Connect the latch cables to the door handle
    • Lift the door panel into place
    • Push in the door panel clips
    • Insert the two 6mm bolts at the bottom of the door panel
    • Insert the two 8mm bolts inside the door handle
    • Insert the 10mm bolt inside the door pull
    • Insert the 6mm bolt next to the window
    • Connect the window switch wiring harness
    • Push in the switch panel
    • Push on the trim piece inside the door handle
    • Push on the trim panel next to the window

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Painter's Tape

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 8mm Socket
  • 5.5mm Socket
  • 6mm Socket
  • 10mm Socket

  • Sockets - SAE

  • 7/32 Inch Socket

5.0 / 5.0
4 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
4
0
0
0
0
Works great and installation video even better
Product worked great and the installation video was a huge help. Easy to follow along.
August 31, 2017
Purchased
6 months ago
Great Product
Product installed easily, great on line video, excellent quality.
August 14, 2017
Purchased
6 months ago
To install
I like the service and I like how it’s gonna regulator on the rack and then one here or to everyone that helped a lot and uses this song time someone is doing so I would recommend
October 1, 2017
Purchased
4 months ago
Easy to follow regulator replacement
Watched the video and found installation easy to do
September 13, 2017
Purchased
5 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(09:11 min)

Tools List:

    Materials, Fluids, and Supplies

  • Painter's Tape

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 8mm Socket
  • 5.5mm Socket
  • 6mm Socket
  • 10mm Socket

  • Sockets - SAE

  • 7/32 Inch Socket



This part replaces:

  • Hollander 135-01922L
  • OE # 6L3Z1627001AA
  • Dorman 741-968

Vehicle Fit

  • 2004 Ford F150 Truck Crew Cab New Body Style Power Window Regulator with Motor Rear Driver Side (High Quality)
  • 2005-2008 Ford F150 Truck Crew Cab Power Window Regulator with Motor Rear Driver Side (High Quality)
  • 2006-2008 Lincoln Mark LT Power Window Regulator with Motor Rear Driver Side (High Quality)
Part #: 1AWRG01618

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More