Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

This replacement window regulator is just what you need to get your vehicle in good shape again!

Specifications:

  • LH (Driver Side) FRONT
  • Power operation
  • Does NOT include power window motor
  • Replaces dealer part numbers: 80721-7S200, 80721 7S 200, 807217S200
  • Direct replacement
  • Built to strict quality control standards

This window regulator makes a great replacement and has good cost savings over a dealer unit.

Please Note:

This window regulator is designed to work with factory style motors only.  Due to variations in aftermarket designs, replacement motors may not have the correct gear style.

Please Note:

This window regulator is a high quality aftermarket part that meets or exceeds the performance of the original. It has been subjected to extensive testing and quality control standards. That is why we offer this regulator with our superior warranty!

Rigorously Tested

Build to strict quality standards

Highest Quality Materials

Made from the highest quality materials for extreme durability and premium performance.

Part Details

  • Operation: Power
  • Regulator Option: without Motor

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Door Panel (0:36)
    • Pry off the trim panel inside the door panel with a flat blade screwdriver
    • Pry off the door pull trim panel with a flat blade screwdriver
    • Remove the 10mm bolt inside the door handle
    • Remove the two 10mm bolts from inside the door pull
    • Pry off the window switch pack with a flat blade screwdriver
    • Disconnect the window switch wiring harnesses
    • Pry off the door panel by hand
    • Lift the door panel up off the window sill
    • Disconnect the courtesy light wiring harness
    • Pull the door handle cable out of the door handle
    • Pull the door lock cable out of the door lock
    • Carefully peel back the water shield
  2. step : Removing the Window Regulator (1:58)
    • Remove the two 10mm bolts from the window clamps
    • Slide the window up by hand
    • Hold the window up with painter’s tape
    • Disconnect the wiring harness inside the door
    • Remove the two lower regulator bolts
    • Loosen the two upper regulator bolts
    • Remove the three 10mm bolts from the window motor
    • Pull the regulator out through the door
  3. step : Preparing the New Regulator (4:04)
    • Remove the three 8mm bolts from the window motor
    • Remove the window motor from the old regulator
    • Position the motor on the new regulator
    • Insert the three 8mm bolts into the window motor
    • Remove the two upper regulator bolts from the old regulator
    • Insert the two upper regulator bolts into the new regulator
  4. step : Installing the New Regulator (4:51)
    • Push the new regulator up into the door
    • Hang the regulator in place
    • Insert the three 10mm bolts into the window motor
    • Tighten the upper regulator bolts
    • Insert the lower regulator bolts
    • Connect the wiring harness inside the door
    • Remove the tape from the window
    • Lower the window by hand
    • Insert the two 10mm bolts into the window clamps
  5. step : Reinstalling the Door Panel (5:55)
    • Put the water shield back into place
    • Push the lock cable into the door lock
    • Push the door handle cable into the door handle
    • Connect the courtesy light wiring harness
    • Lift the door panel onto the window sill, pulling the window switch harnesses through the cavity
    • Push the door panel clips in
    • Connect the wiring harnesses to the power window switch
    • Push the switch panel in starting at the back
    • Insert the 10mm bolt into the door handle
    • Insert the two 10mm bolts into the door pull
    • Push on the door handle trim panel
    • Push on the door pull trim panel

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Painter's Tape

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 7mm Socket

5.00/ 5.0
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Nissasn window regulator
I was very pleased with the part , quick service and the price. Fit perfect and works fine
March 22, 2017
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2004-2010Infiniti QX56 Infiniti QX56 Front Power Window Regulator without Motor Driver Side
2005-2015Nissan Armada Nissan Armada Front Power Window Regulator without Motor Driver Side
2004Nissan Pathfinder Armada Nissan Pathfinder Armada Front Power Window Regulator without Motor Driver Side
2004-2015Nissan Titan Nissan Titan Front Power Window Regulator without Motor Driver Side
Part #: 1AWRG01588


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(07:40 min)